Spec Sheet
4" Submersible Well Pumps
25
Thermoplastic Discharge
Item # Model HP Stages Volts Wire Shut Off (ft)
Weight
(lbs)
Quick Disconnect
Control Box (QD)
Capacitor Run
Control Box (CRC)
Standard Capacitor
Start Capacitor Run
Control Box
558613
W22G07S5-22P 3/4
5 230 2 153 (46.6 m) 27 – – –
558614
W22G07S5-32P 3/4
5 230 3 153 (46.6 m) 27 558823 558824 –
558573
W22G10S7-22P 1
7 230 2 212 (64.6 m) 30 – – –
558574
W22G10S7-32P 1
7 230 3 212 (64.6 m) 33 558833 558834 –
558538
W22G15S9-22P 1-1/2
9 230 2 280 (85.3 m) 40 – – –
558539
W22G15S9-32P 1-1/2
9 230 3 280 (85.3 m) 39 – – 558542
Stainless Steel Discharge
Item # Model HP Stages Volts Wire Shut Off (ft)
Weight
(lbs)
Quick Disconnect
Control Box (QD)
Capacitor Run
Control Box (CRC)
Standard Capacitor
Start Capacitor Run
Control Box
558615 W22G07S5-22S 3/4
5 230 2 153 (46.6 m) 27 – – –
558616 W22G07S5-32S 3/4
5 230 3 153 (46.6 m) 27 558823 558824 –
558597 W22G10S7-22S 1
7 230 2 212 (64.6 m) 30 – – –
558598 W22G10S7-32S 1
7 230 3 212 (64.6 m) 33 558833 558834 –
558548 W22G15S9-22S 1-1/2
9 230 2 280 (85.3 m) 40 – – –
558549 W22G15S9-32S 1-1/2
9 230 3 280 (85.3 m) 39 – – 558842
• 3/4, 1, and 1-1/2 hp
single-phase motors
• Removable suction screen prevents
debris from clogging impellers and
provides full- ow performance
• Hex rubber bearing has multi- ow
channels to keep small particles
away from bearing surface
• Built-in Flomatic™ check valve
assembly provides positive seal,
preventing system drain-back
• Stainless steel bearing sleeve
• Acetal disk facilitates
close tolerances for
increased performance
• Stainless steel up-thrust washer
prevents excessive wear in
severe applications
• Two-year limited warranty
• For both new installs and replacement applications where water must be
transferred under pressure from wells, cisterns, ponds, lakes, and streams
Capacity: 22 gpm (83 lpm)
Discharge: 1-1/4" FNPT (31.7 mm)
Electrical: 230 V
22 GPM
Thermoplastic and Stainless Steel
Applications
Model Characteristics
Features
Series Specifi cations