Specification Sheet
Simplex Package Systems
Structural Foam Polyethylene Basins
Simplex
Package Systems
9E Series
For residential and light to medium com-
mercial use, the Model 9E Series dewa-
tering and effluent pumps handle liquids
and solid waste materials up to 3/4" in
diameter. Pumps feature an 1-1/2" discharge,
with a lift of 23'. Glass-filled nylon cover
and ABS base. Automatic operation has
9"–14" “ON” level range, and 2"–6" “OFF”
level range with adjustable piggyback
mechanical float switch. Package includes
CV-SE check valve and AD–2G adapter
for adapting discharge to 2" PVC pipe.
Applications
n Homes
n Farms
n Light commercial
n Light industrial
n Collection of sewage, effluent, drainage, and seepage water
Series Features
n Handles liquids and solid waste materials
n Cast iron pump housing with epoxy coating for corrosion
and rust resistance
n Oil filled motor housing for lifetime lubrication and
rapid heat dissipation
n Stainless steel screws, bolts, and seal assembly
n Mechanical seals (carbon and ceramic faces)
n Thermal overload protection
n All 115V models are UL listed
n Structural foam polyethylene 18" x 30" basins
n 14 gauge steel, 2 piece cover
n Full flow PVC check valve
9E-SMPX 9S-SMPX 10S-SMPX
9S Series
For medium commercial, agricultural,
and light industrial applications. The
model 9S wastewater and sewage ejector
pumps handle liquids and solid waste
materials up to 2" in diameter. Pumps
feature a 2" or 3" discharge with a maxi-
mum lift of 18'. Cast iron housing and volute
with protective epoxy coating. Automatic
operation has 11"–16" “ON” range and
4"–8" “OFF” range with an adjustable
piggyback mechanical float switch. Packages
include check valve.
10S Series
For increased pumping rates, the model
10S wastewater and sewage ejector pumps
offer greater capacity than the 9S series.
These pumps handle liquids and solid waste
materials up to 2" diameter. Pumps feature
a 2" or 3" discharge with a maximum lift
of 20'. Cast iron housing and volute with
protective epoxy coating. Automatic oper-
ation has a 14"–18" “ON” range and a
8"–12" “OFF” range with an adjustable
piggyback mechanical float switch. Packages
include check valve.
General Description
The Little Giant 9E-SMPX, 9S-SMPX and 10S-SMPX Simplex Packages contain an Eliminator
®
Series Pump, automatic switch,
structural foam polyethylene basins, inlet hub, gas-tight cover assembly, and check valve.
Cover assembly includes all discharge, vent and installation hardware. Basin includes 4" inlet hub in either cast iron caulking hub
or snap-in vinyl configuration. Cover is 2 piece.