Specification Sheet

Features
n Handles liquids up to 200° F
n 1/2" solids handling capability
n Cast iron pump housing with protective epoxy
coating for corrosion resistance
n Oil-filled motor housing for lifetime lubrication
and rapid heat dissipation
n Integral mechanical float switch
n Stainless steel screws, bolts and lifting ring
to protect against corrosion
n Mechanical seals (stainless steel spring,
Carbon and Ni-Resist faces) to assure
maximum protection against pump failure
n Bearings: Upper and lower sintered sleeve
bearings for extended motor life
n Thermal overload protection
n Automatic operation has 10" to 12" “On”
level range
Eliminator Series
Sump/Effluent Pumps
Hi-Temperature 6E Series
This high temperature version of the 6E Sump/Effluent
Pump is capable of pumping heated liquid up to 200°F
liquid. Uses include boiler blow-down sump pits, rendering
plant wash-down sump pits, public utility underground
transformer vaults, industrial steam cleaning sump pits, etc.
These pumps handle liquids and solid waste materials up
to 1/2" in diameter. Pumps feature a 1-1/2" discharge,
with a lift of 20'. Cast iron housing and volute with protective
epoxy coating, high-temperature thermoplastic base and
vortex nylon impeller.
High Temperature
Power Cord
Motor Designed
for Maximum
Performance
Sintered Sleeve
Bearings Lubricated
for Smooth
Operation and
Extended Life
Stainless Steel
Lifting Ring
Stainless Steel
Screws
High Temperature
Thermoplastic
Base for Life-Long
Durability
Vortex Impeller
Engineered
to Enhance
Performance
and Reliability
Heat Resistant
Float
Cold Rolled Steel
Cast Iron Housing
w/Protective Epoxy
Coating to Resist
Corrosion
Oil-Filled to
Dissipate Heat for
Extended Pump Life