Use And Care Manual
8
Manual
Operation
Automatic
Operation
MAINTENANCE
Cleaning Impeller and Volute
Periodic cleaning of the pump parts will prolong the life and eciency
of the pump.
1.
s
!
WARNING Do not remove the motor
housing cover. Warranty is void if the motor housing cover,
impeller or seals have been removed.
2. Remove all debris (gravel, sand, floating debris, etc.) from the
sump basin.
3. Clean the impeller and the volute passage (1). Do not use
strong solvents.
a.
s
!
CAUTION
Do not remove the
impeller. Removal of the impeller requires special tools and
is to be done only by an authorized service center.
4. Be sure the impeller turns freely after cleaning.
CONNECTIONS FOR PUMP OPERATION
Manual Operation
Disconnect the pump cord from the float switch extension and plug it
directly into the GFCI outlet.
s
!
CAUTION
This type of operation should be used
only for emergency use or when a large volume of water is to be
pumped. Pump must not be allowed to run dry. If pump is run dry, it
may damage pump and void the warranty.
Automatic Operation
Plug the pump cord into the float switch extension. Plug the float
switch cord (with pump cord attached) into the GFCI outlet.
1
2
Part No. Description Item No.
14942904 Vertical Switch, Piggyback 10' 2
REPLACEMENT PARTS