Use And Care Manual

MAINTENANCE

Cleaning Impeller and Volute

Periodic cleaning of the pump parts will prolong the life and

eciency of the pump.

1. Remove the 4 bolts and 4 washers (1, 2) that secure the

motor housing (3) to the volute (4), then separate the

motor housing (3) from the volute (4).

WARNING Do not remove the motor

housing cover. Warranty is void if the motor housing cover,

impeller or seals have been removed.

a. Any repair on the motor must be done by an authorized

Little Giant service center.

3. Clean the impeller (5) and the volute passage (6).

Do not use strong solvents.

CAUTION Do not remove the impeller.

Removal of the impeller requires special tools and is to be

done only by an authorized service center.

4. Be sure the impeller turns freely after cleaning.

5. Attach the motor housing (3) to the volute (4) and secure it with

the 4 bolts and 4 washers (1, 2).

REPLACEMENT PARTS

Part No. Description Item No.

110970301 Float Assembly 7

A-N666