Use And Care Manual

ManualsBrandsLittle Giant Select Series ManualsPlumbingLittle Giant® Select Series™ Drill Pump Kit

INTRODUCTION

This pump is designed to be used with a drill (1200 RPM or higher) for

liquid transfer applications and household water removal.

This pump is:

• NOT FOR USE FOR TRANSFERRING POTABLE WATER.

• NOT TO BE INSTALLED IN LOCATIONS CLASSIFIED AS HAZARDOUS IN

ACCORDANCE WITH THE NATIONAL ELECTRICAL CODE (ANSI/NFPA)!

This instruction sheet provides you with the information required to

safely own and operate your product. Retain these instructions for future

reference. The product you have purchased is of the highest quality

workmanship and material and has been engineered to give you long

and reliable service. This product has been carefully tested, inspected,

and packaged to ensure safe delivery and operation. Please examine your

item(s) carefully to ensure that no damage occurred during shipment.

If damage has occurred, please contact the place of purchase. They will

assist you in replacement or repair, if required.

Package Includes

• Drill pump

• One 32" x 3/4" garden hose with FGHT brass coupling

• One white 32" x 1/4" diameter tube (packed inside the garden hose)

• One 1-1/2" x 1/4" black adapter connected to the white tubing

Safety Guidelines

DANGER Do not touch the drill,

hoses or water until the drill is unplugged.

Failure to follow this warning can result in

fatal electrical shock.

WARNING Do not run the pump

dry. The surface temperature of the pump will

rise to a high level. This high level could cause

skin burns if the pump is touched and will cause

serious damage to your pump.

BEFORE GETTING STARTED

READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE, OR SERVICE YOUR PRODUCT. KNOW THE PRODUCT’S APPLICATION,

LIMITATIONS, AND POTENTIAL HAZARDS. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH THESE

INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!

Refer to product data plate(s) for additional operating instructions and speciﬁcations.

This is the safety alert symbol. When you see this

symbol on your pump or in this manual, look for one of the following signal words

and be alert to the potential for personal injury or property damage if ignored:

DANGER warns about hazards that will cause serious personal injury, death or major property damage if ignored.

WARNING warns about hazards that can cause serious personal injury, death or major property damage if ignored.

CAUTION warns about hazards that will or can cause minor personal injury or major property damage if ignored.

NOTICE indicates special instructions which are important but not related to hazards. Carefully read and follow all

safety instructions in this manual and on pump.

DANGER

DO NOT USE TO PUMP FLAMMABLE OR EXPLOSIVE FLUIDS SUCH AS GASOLINE, KEROSENE, ETC. DO NOT USE IN EXPLOSIVE ATMOSPHERES

OR HAZARDOUS LOCATIONS AS CLASSIFIED BY THE NEC, ANSI/NFPA70. FAILURE TO FOLLOW THIS WARNING CAN RESULT IN PROPERTY DAMAGE, PERSONAL INJURY OR

DEATH. DO NOT HANDLE THE PUMP OR DRILL WITH WET HANDS OR WHEN STANDING ON A WET OR DAMP SURFACE OR IN WATER. FAILURE TO FOLLOW THIS WARNING

CAN RESULT IN FATAL ELECTRICAL SHOCK. PUMP SHOULD ONLY BE USED WITH LIQUIDS COMPATIBLE WITH PUMP COMPONENT MATERIALS.

WARNING Follow safety precautions recommended by the drill manufacturer.

WARNING Use three-prong grounded cord or double insulated drill, and follow safety precautions recommended by drill manufacturer.

This equipment must not be used by children or persons with reduced physical, sensory or mental abilities, or lacking in experience and expertise,

unless supervised or instructed. Children may not use the equipment, nor may they play with the equipment or in the immediate vicinity.

s CAUTION

• Keep work area clean, well-lit, and uncluttered.

• Keep safety labels clean and in good condition.

WARNING

• Wear safety glasses while installing or performing maintenance on pump.

• Do not run pump dry.