Installation Guide

Fastener locations for attaching side walls to floor. Apply fasteners on

the inside and outside (as shown). Apply fasteners approximately every

8-10 inches on the outside (into the rim joist) and a least three between

studs on the inside. Fastener locations indicated by dashed lines.

Fastener locations for attaching 2”x6” top plate to side

wall. Apply fasteners on the top (as shown). Apply

fasteners approximately every 8-10 inches. Fastener

locations indicated by dashed lines.

3. Install the side walls to floor (as shown).

4. Install the 2”x6” top plates to side walls (as shown).

* Front *

Side Wall End Profile

(mounted to floor).

* Side Wall *

Side Wall End

Profile (braced).

* Brace both side walls temporarily

(as shown) if necessary, until end

walls are installed.

* Front *

TP24

TP96

* Side Wall *

* Front *

TP24