Use and Care Manual

Wood Workshop
8’x10’ - 12’x24’
Construction Manual © 2007 Little Cottage Co. Page 1
1
2
3
4
5
6
Layout the parts for the oor as shown.
Refer to the diagram for spacing. We
will assemble an 8x12 workshop in this
manual. The other sizes are the same
basic structure, just larger.
Fasten with 2 1/2” screws. We recom-
mend 2 per side.
Once the frame is fastened lay the 4x4’s
underneath. Refer to the layout diagram
for number of 4x4’s and spacing. On
the larger sizes you will need to splice
the 4x4’s by applying a gusset to the
side of them.
Fasten only the ends of the 4x4’s. You
will fasten the rest once you know every-
thing is square.
Measure from one side as shown and
the the other side. Once these numbers
are the same, the oor is square.
Once the oor is squared you can fasten
the rest of the joists to the 4x4’s.