Instructions / Assembly

Wood Cottage Manual

3 4

Once your site is ready you may begin construction of

your oor by laying out your 4x4 runners. You want to

place the runners evenly on 10’ and 12’ wide buildings,

8’ wide will only have 2 runners and they are 6’ apart.

Next install CDX ooring and make sure it is

ush on all sides. Secure in place by driving 1

1/4” screws through the sheeting into the 2x4’s

every 8”.

Now place 2x4’s, 16” on center, on top of the

4x4’s. Place 2 1/2” screws in each of the 4 cor-

ners. Measure from corner to corner to make

sure the oor is square. Now you can fasten

each 2x4 into the 4x4s with 2 1/2” screws.

Locate the rst wall panel, then set in place. Make

sure the wall is ush with the edge of the oor

structure, by using an angle. Apply pressure from

the outside and secure the wall panel to the oor

using 2 1/2” screws.

Next make sure you have 34” in between wall

for man door.

Fasten the wall with 2 1/2” screws as shown.

After you have your 34” opening for the man

door.