Manual

15
Toll Free: 877-250-7729 www.Litter-Robot.com
3. Empty Button + [Wait Time Setting]
Press and Release: Starts an Empty cycle (see page
12), which empties all litter from the Globe into the
Waste Drawer for easy disposal. During the Empty cycle,
the Globe will rotate clockwise, then stop with the yellow
light on, and await your action. Press any button to
return the Globe to the Home position.
To pause the Empty cycle, press any button. Press Cycle
to resume the Empty cycle or Empty or Reset to abort
the cycle and return the Globe to the Home position.
Press and Hold: Enters Wait Time Setting mode (see
page 23). One of the lights will start flashing, indicating
the current Wait Time Setting. Use the Reset button to
toggle to the next setting: blue for 3 minutes, yellow for
7 minutes, and red for 15 minutes. Press and hold the
Empty button to save the setting. The blue light will
blink to confirm, then return to standby.
The Wait Time is the time that elapses starting from
when a cat exits the Globe until the unit performs a
Clean cycle.
It may be useful to reduce the Wait Time to minimize
odor and/or the time that the waste is available to other
pets—such as dogs. However, reducing the Wait Time
may reduce the cleaning effectiveness if clumps do not
have enough time to set up. Extend the Wait Time when
using a lower quality clumping litter that needs more
time to set up.