Manual

11
Toll Free: 877-250-7729 www.Litter-Robot.com
Clean Cycle
After your cat leaves the Globe, the Litter-Robot
automatically performs a Clean cycle. The patented sifting
system separates the clumps from the clean litter and
deposits them into the Waste Drawer below. It takes about
2 ½ minutes. You can also press the Cycle button to start a
Clean cycle.
During a Clean cycle, press any button to pause the cycle.
Press the Cycle button to resume the cycle. Press the Reset
or Empty button to abort the cycle and return the Globe to
the Home position.
How it works:
The Litter-Robot is ready for use when the Globe is at the
Home position and the blue light on the Control Panel is on.
 When a cat enters the Globe, the Cat Sensor is activated;
the blue light turns off and the red light turns on.
 Once the cat exits the Globe, the countdown to a Clean
cycle begins. When the Wait Time (see page 23) has
elapsed, the red light turns off and the yellow light turns
on as a Clean cycle begins.
 The Globe rotates counterclockwise. The yellow light will
be on while cycling.
 During rotation, a weight behind the black rubber Globe
liner causes the liner to fall away from the Globe to
ensure any stuck-on clumps are removed.
 The screen passes through the litter, separating the
clumps from the clean litter. The clean litter is collected
in a chamber behind the screen.
 As the Globe rotates to Dump position, the waste clumps
fall through the Waste Port in the Waste Drawer.
 The Globe then rotates clockwise, toward the Home
position. The Globe liner will fall back into place and the
clean litter will spill back into the litter bed.