Manual

[phone] | www.robotshop.com/ca
7
Setting Up Your Litter-Robot
Your Litter-Robot comes fully assembled and ready to use. Get start-
ed by following the steps below.
Placement
 If possible, place the Litter-Robot in the same location as the
old litter box (at least during transition).
 Make sure the unit is on a firm, level surface. Avoid soft,
uneven, or unstable flooring.
 Keep the unit indoors in a cool, dry location. Reduce exposure
to high temperature and humidity.
 Locate the unit near a power outlet. Ensure the unit isn’t
pushed against a wall or into a corner (must not be
touching any walls).
 Place mats or rugs directly in front of, but not under, the unit.
Do not place mats partially under the unit.
Litter
Fill the Globe through the opening with clumping litter until it meets
the raised Fill Line when spread flat (about 3.6-4.5 kg by weight or
6.6 liters by volume). Be careful not to overfill the Globe.
Fill litter to raised Fill Line
on black rubber liner.