Manual

[phone] | www.robotshop.com/ca
34
What happens if the Globe jams?
If the Globe jams or an excessive load condition occurs, the motor is
turned off automatically. In addition, the Litter-Robot is equipped with
an Anti-Pinch Safety Feature (see page 30).
Does the Litter-Robot require special litter?
No, the Litter-Robot simply requires clumping litter. We recommend
a high-quality, clay-based clumping litter. Use of lightweight litters,
such as corn or wheat, may require more weight to activate the Cat
Sensor. Some silica gel litter beads and crystals can also be used
with the Litter-Robot, as long as they pass through the screen.
Litters that do not work in the Litter-Robot are the strictly absorbent,
non-clumping or loose-clumping litters, newspaper-based litters and
absorbent wood pellet litter.
Does the Litter-Robot work with Feline Pine?
No, Feline Pine pellets are too large to pass through the sifting
screen, which prevents the litter sifting system from working proper-
ly. Feline Pine clumping is also too fluffy to effectively pass through
the sifting screen.
How much litter do I put in the Litter-Robot?
Fill the Globe with approximately 3.6-4.5 kg of litter, until it meets
the raised Fill Line on the black rubber Globe liner when spread flat.
If there is too much litter in the Globe, it will be expelled into the
Waste Drawer during the first few cycles. Since the waste clumps are
removed during each cycle, there is no need to put excessive litter in
the Globe.