Manual

[phone] | www.robotshop.com/ca
26
Base Seal Strips
The Litter-Robot is equipped with brush-type Seal Strips that help con-
tain odors within the Waste Drawer and Base.
Replace the Seal Strips when you notice they are worn flat or peeling
up. Make them last longer by trimming loose edges between replace-
ments. Be careful not to get them wet when cleaning the Base or they
may begin to peel.
Replacement Base Seal Strips can be ordered at www.robotshop.com/
ca or by calling [phone].
Emptying the Litter-Robot
1. Press the Empty button to cycle the Globe clockwise, which
will allow the litter to fall through the Waste Port and into the
Waste Drawer for easy disposal.
2. If litter remains in the Globe, sweep the granules toward the
Waste Port.
3. Press any button to return the Globe to the Home position.
IMPORTANT: Supervise and prevent your cat from entering during the
Empty Cycle, as the unit may not detect your cat without litter in it.
Carbon Filter
Base Seals