Manual

[phone] | www.robotshop.com/ca
21
Bonnet
The Bonnet functions as a cover and guard for the Waste Port as
the Globe rotates. The Bonnet also provides a mount location for the
Night Light, wires, and electrical terminals that provide a low and safe
5VDC to the Night Light LED. The Globe will not rotate without the
Bonnet installed (see Control Panel - Indicator Lights Yellow Light
Flashing, page 17). See page 28-29 for assembly instructions.
Key
The Key is located at the back of the Globe. Position the Key by
snapping it into the pocket in the Base.
Night Light
Underside of Bonnet
Key
Bonnet