Manual

[phone] | www.robotshop.com/ca
18
Red Light: Cat Sensor Activated and Wait Time Countdown
The Cat Sensor has been activated by a cat entering the Globe. Once
the cat exits, the Wait Time countdown to a Clean cycle will begin
(see page 23). You can cancel the timer (red light) by pressing Reset.
Red Light Flashing: Cat Sensor Fault
The Cat Sensor has been continuously activated for 2 minutes or
more, either by a cat that won’t leave the Globe or by too much
weight in the unit.
Check for excess weight, such as too much litter or waste. When you
are done, press the Reset button or turn the unit off then back on to
reset the Cat Sensor.
Yellow Red Lights Flashing Sequentially:
Motor detects obstruction or jam.
Turn the unit off and remove the Bonnet and Globe. Check for gear/
motor obstruction. Reassemble the unit and verify the proper litter
level. Power the unit on and let it cycle. If the problem persists, con-
tact Customer Service.
Blue Yellow Red Flashing Sequentially:
Cannot find Dump position.
The unit will continue to function in Automatic Mode. Contact Cus-
tomer Service.
Red Yellow Blue Flashing Sequentially:
Cannot find Home position.
The unit will continue to function in Automatic Mode. Contact Cus-
tomer Service.
Blue-Yellow-Red Flashing Simultaneously:
Cannot find Home or Dump positions.
The unit will not cycle. Contact Customer Service.