Manual

[phone] | www.robotshop.com/ca
16
Reset Button + [Control Panel Lockout]
Press and Release:
When pressed while the Globe is at the Home position with the blue
light on, it resets the Cat Sensor.
When pressed during a cycle, it pauses the cycle. If pressed again
while paused, it will abort the cycle.
If pressed when the red light is on, it cancels the Wait Time and the
unit returns to standby (blue light on).
IMPORTANT: Any time you do anything that affects the weight or
placement of the unit, including adding or removing litter, emptying
the Waste Drawer, or moving or cleaning the unit, press the Reset
button once you are done. The Reset button adjusts the Cat Sensor
automatically, ensuring the Litter-Robot will detect your cat and cycle
properly.
Press and Hold: Activates Control Panel Lockout (see page 23), indi-
cated by the blue light blinking momentarily.
While in Control Panel Lockout mode, press and hold the Reset but-
ton to exit the mode, indicated by the blue light blinking momentarily.
This setting will disable all button functions on the Control Panel
while allowing the unit to function normally in Automatic Mode.
During Control Panel Lockout you can still turn the unit off by
pressing and holding the Power button for 3 seconds.
Reset Button