Manual

[phone] | www.robotshop.com/ca
15
Empty Button + [Wait Time Setting]
Press and Release: Starts an Empty cycle (see page 12), which emp-
ties all litter from the Globe into the Waste Drawer for easy disposal.
During the Empty cycle, the Globe will rotate clockwise, then stop with
the yellow light on and await your action. Press any button to return
the Globe to the Home position.
To pause the Empty cycle, press any button. Press Cycle to resume
the Empty cycle or Empty or Reset to abort the cycle and return the
Globe to the Home position.
IMPORTANT: Supervise and prevent your cat from entering during the
Empty Cycle, as the unit may not detect your cat without litter in it.
Press and Hold: Enters Wait Time Setting mode (see page 23). One of
the lights will start flashing, indicating the current Wait Time Setting.
Use the Reset button to toggle to the next setting: blue for 3 minutes,
yellow for 7 minutes, and red for 15 minutes. Press and hold the Empty
button to save the setting. The blue light will blink to confirm, then
return to standby.
The Wait Time is the time that elapses starting from when a cat exits
the Globe until the unit performs a Clean cycle.
It may be useful to reduce the Wait Time to minimize odor and/or the
time that the waste is available to other pets—such as dogs. How-
ever, reducing the Wait Time may reduce the cleaning effectiveness
if clumps do not have enough time to set up. Extend the Wait Time
when using a lower-quality clumping litter that needs more time to set
up.
Empty Button