Manual

[phone] | www.robotshop.com/ca
13
Control Panel - Button Functions
Power Button + [Automatic Night Light]
Press and Release: Turns the system power on and off.
Press and Hold: Toggles the Automatic Night Light function on and
off (see page 20).
The Litter-Robot arrives with the Automatic Night Light function ac-
tivated. When the light sensor detects low light conditions, the Night
Light turns on automatically.
Check the status of the Night Light function by covering the light sen-
sor (located above the Cycle button on the Control Panel) to see if
the Night Light comes on or not.
To turn the Night Light function off, press and hold the Power button
for about 5 seconds. The Night Light will flash on, then off.
To turn the Night Light function on, press and hold the Power button
for about 5 seconds. The Night Light will flash on and, depending on
the ambient light, the Night Light will either stay on (if low light) or
turn off (if bright light).
Night Light Sensor
Power Button