Manual

[phone] | www.robotshop.com/ca
12
If your cat re-enters the Globe during the Wait Time countdown (red
light is on), the Cat Sensor detects that weight and will not cycle
with your cat inside (see page 30). Once your cat exits, a new count-
down will begin.
Empty Cycle
The Empty cycle allows you to empty all
of the litter from the Globe into the Waste
Drawer for easy disposal. Use this cycle
to change out the whole bed of litter or
before cleaning the Globe (see page 27).
Press the Empty button to start an Empty
cycle.
During an Empty cycle, press any button
to pause the cycle. Press the Cycle button to resume the cycle.
Press the Reset or Empty button to abort the cycle and return the
Globe to the Home position.
How it works:
1. The Globe rotates clockwise. The yellow light on the Control
Panel will be on while cycling.
2. As the Globe rotates, the litter will fall through the Waste Port
into the Waste Drawer.
3. After the litter is emptied, the Globe will stop with the yellow
light on and await your action. (You may need to sweep any
remaining litter toward the Waste Port.)
4. Press any button to return the Globe to the Home position.
IMPORTANT: Supervise and prevent your cat from entering during the
Empty Cycle, as the unit may not detect your cat without litter in it.
Empty Button