Manual

8
2. Insert the small plug end of the AC/DC adapter cord into
socket located in back of the Base unit.
3. Next, plug the AC/DC adapter into a wall outlet.
4. Locate and press the Power Button. The Litter-Robot will
now perform an initialization cycle which will last
approximately 2 1/2 minutes. After completing the cycle,
the Globe should be in the Home position with the blue LED
on. Your Litter-Robot is now ready to use, however, we
recommend powering off the unit until your cat/s become
familiar with and begin to use the Litter-Robot.
Tip
If this is the first time you have filled the Litter-Robot with
litter and you are trying to get your cats acclimated, you
can pour a cup of used litter from the old litter box on top
of the new litter in the Litter-Robot. This will provide a
familiar scent for your cat. See the next section, 'Getting
Your Cat to Use the Litter-Robot' for more tips.
Getting Your Cat to Use the Litter-Robot
Most likely, your cat will quickly adapt to the Litter-Robot. We
recommend the following steps:
• Place the Litter-Robot in the same location as the current
litter pan. Set up the Litter-Robot according to the
instructions (make sure you add litter to the Globe) and
make sure it is turned OFF. Give your cats a day or two to
explore the Litter-Robot. If your cats show no interest, you
Toll Free: 877-250-7729 www.Litter-Robot.com