Manual

28
Safety Features
Globe Bonnet
The Bonnet functions as a cover and guard for the waste
port as the Globe (and waste port) rotates from the top of
the unit into the Base. The Bonnet also provides a mount
location for the Automatic Night Light, wires, and electrical
terminals that provide a low and safe 5VDC to the Night
Light. The Globe will not rotate without the Bonnet installed
(see Control Panel - Indicator Lights section -> Yellow LED
Flashing, page 16).
Cat Re-Entry Protection
If the Cat Sensor detects that your cat is trying to enter the
Litter-Robot during a cleaning cycle the Globe will stop
rotating. The Litter-Robot then waits for 15 seconds before
attempting to resume the clean cycle. Note that weight
applied on the Step and/or Step Mat will not trip the Cat
Sensor and stop the Globe rotation. This is intentional as
we do not want to invite a cat to enter by stopping
the Globe rotation. If however, the cat steps inside,
the Globe will immediately stop.
Anti-Pinch Safety Feature
The Litter-Robot comes equipped with an anti-pinch feature
to make the Litter-Robot extra safe for your cat. If a
potential pinch condition is detected, the Globe automatically
stops and then reverses direction for approximately 2
seconds. The Yellow LED will then flash twice per second
for 1 minute.
Toll Free: 877-250-7729 www.Litter-Robot.com