Manual

15
Control Panel - Indicator Lights
Blue LED On (OK/Waiting)
This LED indicates that the unit is OK and that the Litter-
Robot is ready for your cat.
Blue LED Flashing (Waste Drawer is Full)
The blue LED flashing indicates that the Waste Drawer is
approaching full condition. Remove waste and press Reset
to cancel indicator.
Yellow LED On (Cycling/In Use)
The Litter-Robot is cycling (Cleaning cycle or Empty cycle).
Yellow LED Flashing Once per Second (Cycle
Interrupted by Cat Sensor or Bonnet Removal)
1. While cycling, if the Cat Sensor is activated by your cat
entering the Globe, the unit will stop and the yellow LED will
flash once per second. 15 seconds after your cat has left
the Globe, the unit will start to cycle again.
2. If Bonnet is removed during a cycle or while Globe is at
home position, the unit will stop (if previously cycling) and
the yellow LED will flash once per second.
3. Unit will resume previous function 5 seconds after
replacing Bonnet.
Yellow LED Flashing Twice per Second (Cycle
Interrupted by Anti-Pinch Safety Feature)
While cycling, if the Anti-Pinch Safety feature is activated,
the Globe will stop and reverse direction for 2 seconds and
then stop. The Yellow LED will then flash twice per second
for 1 minute. After this 1 minute period the Yellow LED will
stop flashing and Globe will attempt to rotate toward Home
position again.
Toll Free: 877-250-7729 www.Litter-Robot.com