Manual

13
repeated every 24 hours at the time of initial setting. Press
and hold Cycle button to exit this mode - note that if not
within 8 Hour Sleep Mode period, yellow LED will flash on
then off indicating you have exited this mode.
3. Empty Button + [Wait Time Setting]
Press and Release: Empties all litter from Globe into the
Waste Drawer. Press any button to return the Globe to
home position.
Press and Hold: Holding the Empty button will enter Wait
Time Setting mode indicated by one of the LEDs flashing.
Now use the Reset button to toggle between the different
wait times.
Blue flashing= 3 minute wait time
Yellow flashing = 7 minute wait time
Red flashing = 15 minute wait time
Press and hold the Empty button to save this setting.
The Wait Time is the elapsed time starting from when your
cat exits the unit to when the unit runs a clean cycle.
It may be useful to reduce the wait time to minimize odor
and/or the time that the waste is available to other pets -
such as dogs. However, reducing the wait time may reduce
the cleaning effectiveness (clumps do not have enough time
to set up). Extending the wait time may be desirable when
using a lower quality clumping litter that needs more time
to set up.
Toll Free: 877-250-7729 www.Litter-Robot.com