Datasheet

PolySwitch Resettable Devices – Strap Battery Devices
209
RoHS Compliant, ELV Compliant
12
Test Conditions Resistance Change
Passive aging -40°C, 1000 hours ±5% typical
60°C, 1000 hours ±10% typical
Humidity aging 60°C/95% RH, 1000 hours ±10% typical
Thermal shock 85°C, -40°C (10 times) ±5% typical
Vibration MIL-STD-883D, Method 2026 No change
Lead material 0.125mm nominal thickness, quarter-hard nickel
Tape material Polyester
VLP and VTP
Physical Characteristics
Environmental Specifications
Test Conditions Resistance Change
Passive aging -40°C, 1000 hours ±5% typical
60°C, 1000 hours ±20% typical
Humidity aging 60°C/95% RH, 1000 hours ±30% typical
Thermal shock 85°C, -40°C (10 times) ±5% typical
Vibration MIL-STD-883D, Method 2026 No change
Lead material 0.1mm nominal thickness, half-hard nickel
Coating material Epoxy
MXP
Physical Characteristics
Environmental Specifications
Test Conditions Resistance Change
Passive aging 70°C, 1000 hours ±10% typical
Humidity aging 85°C/85% RH, 7 days ±5% typical
Vibration MIL-STD-883C, Test Condition A No change
Lead material 0.125mm nominal thickness, quarter-hard nickel
Tape material Polyester
SRP
Physical Characteristics
Environmental Specifications
Table B5 Physical Characteristics and Environmental Specifications for Strap Battery Devices Cont’d
Test Conditions Resistance Change
Passive aging 70°C, 1000 hours ±10% typical
Humidity aging 85°C/85% RH, 7 days ±5% typical
Vibration MIL-STD-883D, Method 2026 No change
Lead material 0.125mm nominal thickness, quarter-hard nickel
Tape material Polyester
LR4
Physical Characteristics
Environmental Specifications
Note: Storage conditions: 40°C max., 70% RH max.; devices should remain in original sealed bags prior to use. Devices may not meet specified values if these storage conditions are exceeded.