Cut Sheet

2880 North Plaza Drive • Rapid City, SD 57702
[phone] • [phone] • FAX [phone]
www.symcominc.com • email: [e-mail]
Features
Liquid crystal display.
LED's indicate mode of
operation, fault status,
communication status,
and run status.
Easily mounted on the
front of a panel and
rated for environmental
protection.
Can be mounted up to
4000 feet from the
motor starter.
Second communication
port is standard.
Model
RM-2000
•
Engineered
Protection
•
Motor
Management
The RM-2000 is available
with a variety of options
including:
•Two form – C (SPDT)
auxiliary relays –
individually programmable
for numerous functions
(Option 1)
• Analog output available –
0-20mA, 4-20mA,
0-5VDC, or 0-10VDC
(Option 2)
• Analog/digital input –
several available
configurations, consult
factory (Option 3)
• Call the factory for
additional options
.
The RM-2000 is a motor monitoring device to be used in conjunction with
SymCom's Model 777. The RM-2000/777 motor management system
combines unsurpassed electronic motor protection and critical, user
friendly motor monitoring.
The RM-2000 has membrane keypad controls which allow both monitoring and
control of a 777 MotorSaver
®
through a RS485 network using Modbus RTU
protocol. A second communication port is standard and allows monitoring and
control of up to 99 RM-2000 devices from a computer with Solutions Software
installed, a PLC, DCS, or SCADA system. The RM-2000 is environmentally
protected and is easily mounted on the front of a panel or MCC.
A liquid crystal display informs users of the following motor information:
• Average current, individual line currents, and current unbalance
• Current to ground
• Average voltage, line-line voltages, and voltage unbalance
• Instantaneous power
• Power factor
• Last four faults
• All parameters programmed into 777 MotorSaver
®
• Remaining restart delay times
The RM-2000 is also equipped with a real-time clock, which allows access to
the following motor management information:
• Total motor run-time (re-settable)
• Time and date of last four faults, along with voltage and current at time of trip
• Time and date of last 10 motor starts
• Total number of motor restarts (re-settable)
• Minimum time between any two starts with time and date (re-settable)
• Run-time since last start (re-settable)
• KWH consumed (re-settable)
• KVAR's consumed (re-settable)
10/02