Cut Sheet

littelfuse.com © 2018 Littelfuse POWR-GARD
®
Products
Rev: 2-B-051818
POWR-GARD
®
Blocks and Holders Datasheet
8 of 8
POWR-BLOKS
Distribution Block and Splicer Block Outline Drawings
Dimensions Inches (mm)
CHICAGO, ILLINOIS 60631
3RD ANGLE
PROJECTION
A1 OL-for datasheet
Littelfuse
®
REVISION
DRWG NO.
TITLE
C
DRW DATE
GRAMS/PIECE
FINISH GOOD WT
MYORK
12/7/2017
MATL SPEC FINISH
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN MILLIMETERS, DIMENSIONS IN
BRACKETS [ ] ARE INCHES DIMENSIONING AND DO NOT INCLUDE PLATING. TOLERANCING
TO BE INTERPRETED IN ACCORDANCE WITH ANSI Y14.5M-1994
DENOTES CRITICAL CHARACTERISTICS.
DENOTES CPK DIMENSIONS, -MINIMUM CPK VALUE
DENOTES A CHARACTERISTIC THAT PROVIDES
AN INDICATION
OF PROCESS PERFORMANCE. PROCEDURE FOR MEASUREMENT
AND TRACKING TO BE DEFINED IN
LITTELFUSE INSPECTION INSTRUCTIONS.
DENOTES CP DIMENSIONS, -MINIMUM CP VALUE
MUST BE WITHIN THE DIMENSIONAL LIMITATIONS
SHOWN ON DRAWING AND INITIALLY LOCATED TO
ALLOW FOR MAXIMUM TOOL LIFE.
CPK

CP
SHEET 1 OF 1
SCALE
0LD1440 & 0LS1330 Series for datasheet
NTS
REVISION
REV DATE DESCRIPTION
A1
12/7/17
CREATED FOR DATASHEET UPDATE MRY
7.11
[0.28]
35.98
[1.42]
5.03
[0.20]
58.12
[2.29]
49.07
[1.93]
R.10 X .06
[2.6 X .15]
THRU TYP.
21.46
[0.85]
14.20
[0.56]
16.13
[0.64]
37.59
[1.48]
48.39
[1.91]
69.85
[2.75]
10.73
[0.42]
10.73
[0.42]
10.73
[0.42]
41.20
[1.62]
15.21
[0.60]
17.78
[0.70]
1-pole
2-pole
4-pole
2-pole 4-pole1-pole
Figure 10
Disclaimer Notice – Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse
products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/product-disclaimer.