Manual

88
Revised: July 12, 2010
POLYFUSE
®
Resettable PTCs
© 2010 Littelfuse, Inc.
60R Series
Radial Leaded > 60R Series
Specifications are subject to change without notice.
Please refer to www.littelfuse.com/series/60R.html for current information.
Dimension EIA Mark IEC Mark
Dimensions
Dim. (mm) Tol. (mm)
Carrier tape width WW 18 -0.5 / +1.0
Hold down tape width W
4
W
0
11 min.
Top distance between tape edges W
6
W
2
3 max.
Sprocket hole position W
5
W
1
9 -0.5 / +0.75
Sprocket hole diameter* D
0
D
0
4 -0.32 / +0.2
Abscissa to plane(straight lead) HH 18.5 -/+ 3.0
Abscissa to plane(kinked lead) H
0
H
0
16 -/+ 0.5
Abscissa to top 60R010-60R090 H
1
H
1
32.2 max.
Abscissa to top 60R110-60R300 H
1
47.5 max.
Overall width without lead protrusion:60R010-60R090 C
1
42.5 max.
Overall width without lead protrusion:60R110-60R300 57
Overall width with lead protrusion:60R010-60R090 C2 43.2 max.
Overall width with lead protrusion:60R110-60R300 58
Lead protrusion L
1
l
1
1.0 max.
Protrusion of cut out LL 11 max.
Protrusion beyond hold-down tape l
2
l
2
Not specified
Sprocket hole pitch:60R010-60R090 P
0
P
0
12.7 -/+ 0.3
Sprocket hole pitch:60R110-60R300 P
0
P
0
25.4 -/+ 0.5
Pitch tolerance 20 consecutive. -/+ 1
Device pitch:60R010-60R090 12.7
Device pitch:60R110-60R300 25.4
Tape thickness tt 0.9 max.
Tape thickness with splice t
1
2.0 max.
Splice sprocket hole alignment 0 -/+ 0.3
Body lateral deviation Δh Δh 0 -/+ 1.0
Body tape plane deviation Δp Δp 0 -/+ 1.3
Ordinate to adjacent component lead*:60R010-60R090 P
1
P
1
3.81 -/+ 0.7
Ordinate to adjacent component lead*:60R110-60R300 7.62 -/+ 0.7
Lead spacing:60R010-60R185 FF 5.08 -/+ 0.8
Lead spacing:60R250-60R300 FF 10.18 -/+ 0.8
*Differs from EIA Specification
Tape and Ammo Specifications
Devices taped using EIA468-B/IE286-2 standards. See table below and Figure 1 for details.