User's Manual

06 07
3. When the battery power is very low, the changes of the
brightness mode might not be obvious.
1. It is recommended to turn off the light and charge it
under direct sunlight for 1-2 days before the first use.
Make sure the product has enough power.
2. If you want to check whether the product can work
normally or not, please turn it on by pressing the back
button, then cover the solar panel with your hands in the
daytime or put it in a dark environment.
NOTE:
INSTALLATION
Press the back button and select a desired mode. Then
choose a place that can get enough sunshine to install
the light, the longer it gets sunshine, the longer it can
illuminate.
Method 1: Ground Inserted
Connect the extension stick, ground stake and the light
together. Then adjust the angle of solar panel and light
head through loosening or tightening the knob screw to
get enough sunlight during the day.
Insert the whole light into the ground vertically.