Specification
Catalog Number
Notes Type
Undercabinet Light
UC
1" Wrap-Front Lens
Sheet #: UC UNC-110
FEATURES
• Trim, low-profile design, only 1-3/16" deep.
• Flattened knockouts for cleaner appearance.
• Snap-fit channel cover attachment. No tools required for wireway access.
• Hinged, removable channel cover allows hands-free wiring and
quick installation.
• Factory-installed starters on all preheat models.
• Romex/BXR conduit connector provided with each fixture.
• Optional instant-on electronic start magnetic ballast for flicker-free lamp start.
• Low-brightness, linear prismatic diffuser provides improved visual comfort.
• 15% DR acrylic and snap-fit diffuser design for improved shatter-resis-
tant and positive attachment.
• Optional task diffuser with clear linear prismatic bottom and opaque
front for maximum illumination without direct edge glare.
• Five fixture lengths available.
• Available with factory-installed lamp, switch, cordset and convenience
outlet options.
• Certain airborne contaminants can diminish integrity of acrylic.
Click
here for Acrylic Environmental Compatibility table for suitable uses.
SPECIFICATIONS
BALLAST — Normal power factor reactor type ballast standard. Others
available (See ordering information).
WIRING & ELECTRICAL — Fixture conforms to UL 1570 and is suitable for
damp locations. AWM, TFN or THHN wire used throughout, rated for re-
quired temperatures.
MATERIALS — Metal parts precision roll-formed from 20 gauge cold rolled steel.
FINISH — Five-stage iron-phosphate pre-treatment ensures superior
paint adhesion and rust resistance. Painted parts finished with polyester
powder paint.
LISTING — UL listed and labeled. Listed and labeled to comply with Canadian
and Mexican Standards.
NOTE: Specifications subject to change without notice.
Example: UC 33E OP 120
ORDERING INFORMATION
Series
UC Undercabinet
light
UC
Fixture length/ballast type
12E (1) 8W T5, instant start
electronic
21E (1) 13W T5, instant start
electronic
24E (2) 8W T5, instant start
electronic
33E (1) 8W and 13W T5,
instant start electronic
42E (2) 13W T5, instant start
electronic
Voltage
120
Options
GLR Internal fast-blow fuse
GMF Internal slow-blow fuse
CSW 6-foot, 3-wire, grounded cordset,
right end
LPWW Warm white 3000K T5 lamp(s);
factory supplied
PAF White powder paint finish after
fabrication
CO Grounded convenience outlet.
Installed, bottom right, 120V only
SWR Rocker switch, installed bottom
right, 120V only
CSA Listed and labeled to comply with
Canadian Standards
NOM Listed and labeled to comply with
Mexican Standards
Diffuser
(blank) Standard, milk-
white, DR acrylic
OP Opaque-front,
clear bottom DR
acrylic
Fluorescent