Specification

Introduction
TWX LED wall pack family, a ground-up design
that has the low initial cost customers demand
while providing superior performance and
a traditional form. The TWX3 LED is energy
efficient, saving up to 84% in energy costs when
replacing a metal halide luminaire. Offering
an expected service life of more than 20 years,
the TWX3 LED eliminates frequent lamp and
ballast replacements associated with traditional
technologies.
The Adjustable Light Output (ALO) feature
allows the contractor to set the light output
during installation, to a level perfectly suited for
the job site. The TWX3 LED ALO luminaires can
replace anything from a 100W to 400W metal
halide luminaire.
One Lithonia Way • Conyers, Georgia 30012 • Phone: [phone]-SERV (7378) • www.lithonia.com
© 2020 Acuity Brands Lighting, Inc. All rights reserved.
TWX3 LED
Rev. 12/03/20
COMMERCIAL OUTDOOR
TWX3 LED
LED Wall Luminaire
Catalog
Number
Notes
Type
Depth: 5.0"
Height: 14.0"
Width: 18.0"
Weight:
(without options)
21 lbs
Hit the Tab key or mouse over the page to see all interactive elements.
Specifications
Series Package Color Temperature Voltage Options Finish
TWX3 LED P1 8,800 lumens
P2 10,650 lumens
P3 12,900 lumens
P4 13,850 lumens
ALO 2,900 - 13,850 lumens
30K 3000K
40K 4000K
50K 5000K
MVOLT (120-277V)
347
PE Photocell, Button Type DDBXD Dark bronze
DBLXD Black
DWHXD White
DNAXD Natural aluminum
DDBTXD Textured dark bronze
DBLBXD Textured black
DWHGXD Textured White
DNATXD Textured natural aluminum
Ordering Information
EXAMPLE: TWX3 LED ALO 40K MVOLT DDBXD
Luminaire Voltage Photocell
Lumens (4000K)
P1 P2 P3 P4
TWX1 LED MVOLT (120-277V) YES 1,600 2,950 -- --
TWX2 LED MVOLT (120-277V), 347V, 480V YES 3,250 4,400 5,250 6,850
TWX3 LED MVOLT (120-277V), 347V YES 8,800 10,650 12,900 13,850
TWX LED Family Overview
W
H
D
FEATURES & SPECIFICATIONS
INTENDED USE
The TWX3 LED is an energy-efficient, low maintenance LED wall pack for replacing up to a
400W MH fixture, providing the same footprint on the wall. TWX3 is ideal for higher mounting
height applications such as industrial buildings, warehouses and schools.
CONSTRUCTION
Two-piece die-cast aluminum housing to optimize thermal management through
conductive and convective cooling. The door is hinged on the side and can be removed
for easy installation. The housing is completely sealed against moisture and environmental
contaminants (IP65) and is suitable for the hose-down applications.
FINISH
Exterior painted parts are protected by a zinc-infused Super Durable TGIC thermoset
powder coat finish that provides superior resistance to corrosion and weathering. A tightly
controlled multi-stage process ensures a 3 mils thickness for a finish that can withstand
extreme climate changes without cracking or peeling.
OPTICS
The advanced optical design uses both reflector and refractor technologies that work
together to create superior illumination and further throw, getting the light where it is
needed. The US-made borosilicate glass refractor is specifically designed to maximize light
extraction and create a fully luminous luminaire for a better nighttime look.
INSTALLATION
Designed for wall mounting above four feet from the ground. Housing is configured for
mounting directly over a standard junction box (by others) or for surface wiring via any of
three 1/2” threaded entry hubs.
LISTINGS
CSA certified to U.S. and Canadian standards. IP65 rated for outdoor applications. Rated
for -40°C minimum ambient.
DesignLights Consortium
®
(DLC) qualified product. Not all versions of this product may be
DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL
to confirm which versions are qualified.
WARRANTY
5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/support/warranty/terms-and-conditions
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.