Installation Guide

page 3
INSTALLATION INSTRUCTIONS
Remove xture components and parts pack. Check to ensure
all parts are included. Note: Account for small parts and destroy
packing material, as these may be hazardous to children.
This wall pack is designed to be mounted to a properly installed
and grounded UL listed recessed junction box or to a wall for
wiring via surface conduit.
Turn OFF Power at circuit breaker box.
CAUTION: Do not rely on wall switch alone to turn o󰀨 power
Table - 1 Choose Settings (Optional)
Switchable Photocontrol ON*/OFF
Color Temperature 3000K/4000K*/5000K
Adjustable Lumens 2200*
1500
800
*Factory Setting
1. Loosen Di󰀨user Screws (3) and remove Di󰀨user (2). Note:
Screws are held captive by O-ring. See Fig. A.
2. Loosen Reector Screws (5), slide Reector (4) upward and
remove Reector (4). See Fig. A.
3. Determine knockouts appropriate for your application and
prepare the rear housing for mounting by drilling out or by
unscrewing appropriate mounting slot knock outs and supply wire
access hole for surface or junction box mounting. See Figure B
FIXTURE PACKING LIST
Description Quantity
1) Rear Housing ...................................................................... 1
2) Di󰀨user ................................................................................ 1
3) Di󰀨user Screws ................................................................... 2
4) Reector .............................................................................. 1
5) Reector Screws ................................................................. 2
6) Gasket ................................................................................. 1
8) Conduit Plug.........................................................................1
7) Mounting Screws* ............................................................... 2
8) Wire Nuts* ........................................................................... 3
9) Photocontrol ........................................................................ 1
10) ALO/CCT Switch..................................................................1
*Contained in parts packs
Mounting Hardware Included
Figure A
4)Reector
6) Gasket
2) Di󰀨user
3) Di󰀨user
Screws
1) Rear Housing
5)Reector Screws
Figure B
Conduit Plug
Mounting slot