Specification

FEATURES & SPECIFICATIONS
INTENDED USE
For entrances, stairwells, corridors, other pedestrian areas.
CONSTRUCTION
Cast aluminum backplate on which electrical components are mounted for
maximum heat-dissipation. Gasketing between backplate and front cover pre-
vents the entry of water and contaminants. External hardware includes
phillips head and tamper-proof hex-head fasteners.
FINISH
Dark bronze (DDB) or white (DWH) front cover available for all wattages.
OPTICAL SYSTEM
Front cover/refractor is injection-molded, one-piece, UV-stabilized polycar-
bonate. Optical system is sealed and gasketed to inhibit entrance of outside
contaminants.
ELECTRICAL SYSTEM
35W-70W HPS and 50W MH use 120V normal power factor.
Porcelain, medium-base socket with copper alloy nickel-plated screw shell
and center contact. UL listed 660W, 600V, 4KV pulse rated. Medium-base lamp
included with the fixture.
INSTALLATION
Units are for wall mounting and include two 3/4" knockouts for routing electri-
cal conduit.
LISTING
UL listed for wet locations. Listed and labeled to comply with Canadian Standards.
Small Polycarbonate Wall Pack
TWS
METAL HALIDE
50W
HIGH PRESSURE SODIUM
35W, 50W, 70W
8' to 12' Mounting
Catalog Number
Notes
Type
Accessories
Order as separate catalog numbers
RK1 PEB1 Photocell kit (120V only)
TWSWG Wireguard
Outdoor Sheet #: TWS-M-S BM-415
Voltage
120
TWS
Options
Shipped installed in fixture
PE Photoelectric cell as
standard
LPI Lamp included as standard
Architectural colors (optional)
(blank) Dark bronze
DWH White
Wattage/lamp
Metal halide
50M
High pressure
sodium
35S
50S
70S
Series
TWS
Specifications
Height: 11" (27.9cm)
Width: 6-1/2" (16.5cm)
Depth: 5-1/4" (13.3cm)
Weight: 4.9 lbs./2.2 kgs
120
ORDERING INFORMATION
For shortest lead times, configure product using standard options (shown in bold).
Example: TWS 50M 120 PE LPI