Specification

ManualsBrandsLithonia Lighting ManualsLighting & Ceiling FansMetal Halide Small Bronze Cut-Off Wall Pack with Glass Lens with Multi-Tap Ballast

OUTDOOR TWR1C-M-S

Catalog

Number

Notes

Type

All dimensions shown in inches (centimeters) unless otherwise noted.

eight as congured in example below.

Example: TWR1C 100M TB LPI

Cuto Wall Packs

TWR1C

METAL HALIDE: 70175W

HIGH PRESSURE SODIUM: 70150W

FEATURES & SPECIFICATIONS

INTENDED USE

Ideal for mounting above entryways and loading docks.

CONSTRUCTION

Rugged, corrosion-resistant die-cast aluminum back housing and hinged door frame. Castings are sealed

with a one-piece gasket to inhibit the entrance of external contaminants. Lens is thermal- and shock-

resistant clear tempered glass. Finish is bronze polyester powder paint for lasting durability.

OPTICS

Anodized aluminum reector, provides IES cuto distribution. Optional full cuto visor available.

Medium-base lamp included in carton.

ELECTRICAL

HID: Ballast is high-reactance, high-power-factor for 70-150W. Ballast is 100% factory-tested.

Socket: Medium-base socket, nickel-plated screw shell and center contact.

INSTALLATION

Housing is congured for mounting directly over a standard 4" outlet box or for surface wiring via any of

three convenient 1/2" threaded conduit entry hubs.

LISTING

UL Listed to US and Canadian safety standards (see Options). Suitable for wet locations (25

C maximum

ambient temperature).

Specications subject to change without notice.

Specications

Height: 10-1/4 (26.0)

Width: 13 (33.0)

Depth: 8-1/2 (21.5)

*Weight: 16.45lbs/ 7.46kg

ORDERING INFORMATION

Catalog Photocell Lamp Available

Number Wattage Voltage included included in Canada

Metal halide

TWR1C 70M 120/347 LPI CSA 70 120/347 N Y Y

TWR1C 70M TB LPI 70 120/208/240/277 N Y N

TWR1C 100M 120/347 LPI CSA 100 120/347 N Y Y

TWR1C 100M TB LPI 100 120/208/240/277 N Y N

TWR1C 150M 120 PE LPI 150 120 Y Y Y

TWR1C 150M 277 PE LPI 150 277 Y Y Y

TWR1C 150M TB LPI 150 120/208/240/277 N Y N

TWR1C 175M 120/347 LPI CSA 175 120/347 N Y Y

High pressure sodium

TWR1C 70S 120/347 LPI CSA 70 120/347 N Y Y

TWR1C 70S TB LPI 70 120/208/240/277 N Y N

TWR1C 100S 120/347 LPI CSA 100 120/347 N Y Y

TWR1C 100S TB LPI 100 120/208/240/277 N Y N

TWR1C 150S 120/347 LPI CSA 150 120/347 N Y Y

TWR1C 150S TB LPI 150 120/208/240/277 N Y N

Accessories: Order as separate catalog number.

Shipped separately

TWR1C FCV U F

ull cuto visor

TWR1C WG U Wireguard

Summary of content (2 pages)

PAGE 1
Catalog Number Notes FEATURES & SPECIFICATIONS INTENDED USE Type Ideal for mounting above entryways and loading docks. CONSTRUCTION Rugged, corrosion-resistant die-cast aluminum back housing and hinged door frame. Castings are sealed with a one-piece gasket to inhibit the entrance of external contaminants. Lens is thermal- and shockresistant clear tempered glass. Finish is bronze polyester powder paint for lasting durability.
PAGE 2
TWR1C High Pressure Sodium/Metal Halide Cutoff Wall Pack TEST NO: LTL12165 ISOILLUMINANCE PLOT (Footcandle) 0.5 0.25 1 2 3 4 2.5 1.5 1 0.5 0.25 0 1 2 3 4 TWR1C 100M 5 1 2.5 1.51 0.5 2 0.25 3 4 3 4 70W metal halide lamp Footcandle values based on 10' mounting height, 5200 rated lumens. Luminaire Efficienc y: 69.0% 5 IN UNITS OF MOUNTIN G H EI GH T 0 2 0.5 0.25 3 1 2 3 4 5 TEST NO: LTL12166 -2 -1 0 5 1 2.5 1.5 1 2 0.