Specification

Catalog
Number
Notes
Type
ORDERING INFORMATION
All dimensions are inches (centimeters).
Notes
1 These wattages do not comply with California Title20 regulations.
CONTRACTOR SELECT / OUTDOOR BUILDING_MOUNTED_MH_HPS
Approx. Standard
Catalog Lamp Lamp Weight Pallet Carton
Number UPC Description Wattage Source Voltage Finish Included (lbs) Qty Qty
TWR1 150M TB LPI 745975146000 Non-cuto 150 MH 120/208/240/277 Dark bronze Y 18 36 1
TWR1 150S TB LPI 784231137017 Non-cuto 150 HPS 120/208/240/277 Dark bronze Y 18 36 1
TWR1C 150M TB LPI 745975151004 Cuto 150 MH 120/208/240/277 Dark bronze Y 18 32 1
TWR2 250M TB SCWA LPI 745975145324 Non-cuto 250
1
MH 120/208/240/277 Dark bronze Y 26 24 1
TWR2C 250M TB SCWA LPI 745975145379 Cuto 250
1
MH 120/208/240/277 Dark bronze Y 21 16 1
TWR2 400M TB SCWA LPI 745975145348 Non-cuto 400
1
MH 120/208/240/277 Dark bronze Y 31 24 1
TWR2C 400M TB SCWA LPI 745975145423 Cuto 400
1
MH 120/208/240/277 Dark bronze Y 25 16 1
FEATURES & SPECIFICATIONS
PRODUCT OVERVIEW
Building-mounted light for entrances, stairwells, corridors and other pedestrian areas.
Non-cuto, and cuto congurations.
CONSTRUCTION
Rugged, corrosion-resistant, die-cast aluminum back housing and hinged door frame. Castings are sealed
with a one-piece gasket to inhibit the entrance of contaminants.
Dark bronze housing congured for mounting directly over a standard 4" outlet box or for surface wiring via
any of three convenient 1/2" threaded conduit entry hubs.
Anodized aluminum reector.
ELECTRICAL SYSTEM
Ballast — Quad-tap, pulse start, 100% factory-tested, high power factor for 250W MH and 400W MH.
Meets or exceeds the minimum eciency required by the Energy Independence and Security Act of 2007
(EISA). Quad-tap, high-reactance, high power factor ballast for 150W.
Socket — Mogul-base socket for 250W and 400W MH. Medium-base socket for 150W.
LISTINGS
Listed and labeled to UL standards for wet locations.
25°C maximum ambient temperature.
WARRANTY
Fixtures are covered by Lithonia Lighting 24-month warranty against mechanical defects in manufacture.
Note: Specications subject to change without notice.
Contractor Select
Building Mounted
150400W
9-1/4
(23.5)
D
17-7/8
(45.4)
250W 400W
Depth: 9-3/8 (23.8) 12-1/2 (31.8)
Weight: 26 lbs (11.8 Kg) 31 lbs (14Kg)
9
(22.9)
7-3/8
(18.8)
13
(33.0)
Weight: 18 lbs (8.1 kg)
14-1/2
(36.8)
17-7/8
(45.4)
10
(25.4)
13
(33.0)
10-1/4
(26.0)
8-1/2
(21.5)
TWR1
TWR1
TWR2
TWR2C
TWR2C
TWR1C