Specification

ManualsBrandsLithonia Lighting ManualsLighting & Ceiling FansMetal Halide Small Bronze Wall Pack with Glass Lens with Multi-Tap Ballast

OUTDOOR TWR1-M-S-CFL

Catalog

Number

Notes

Type

Wall Packs

TWR1

METAL HALIDE: 70-175W

HIGH PRESSURE SODIUM: 70150W

COMPACT FLUORESCENT: 2/42W

FEATURES & SPECIFICATIONS

INTENDED USE

Ideal for mounting above entryways and loading docks.

CONSTRUCTION

Rugged, corrosion-resistant die-cast aluminum back housing and hinged door frame. Castings are sealed

with a one-piece gasket to inhibit the entrance of external contaminants. Finish is bronze polyester powder

paint for lasting durability.

OPTICS

Refractor is prismatic borosilicate glass. Reector is die-formed anodized stippled aluminum.

Medium-base lamp included in carton.

ELECTRICAL

HID: Ballast is high-reactance, high-power-factor for 70-150W. Ballast is 100% factory-tested.

Compact uorescent: Electronic, high-frequency, multi-volt ballast.

Socket: Medium base socket, nickel-plated screw shell and center contact.

INSTALLATION

Housing is congured for mounting directly over a standard 4" outlet box or for surface wiring via any of

three convenient 1/2" threaded conduit entry hubs.

LISTING

UL Listed to US and Canadian safety standards (see Options). Suitable for wet locations (25

C maximum

ambient temperature).

Specications subject to change without notice.

Specications

Height: 9 (22.9)

Width: 13 (33.0)

Depth: 7-3/8 (18.8)

*Weight: 16.45 lbs/7.46kg

Example: TWR1 70M 120/347 LPI CSA

ORDERING INFORMATION

Catalog Photocell Lamp Available

Number Wattage Voltage included included in Canada

Metal halide

TWR1 70M 120/347 LPI CSA 70 120/347 N Y Y

TWR1 70M TB LPI 70 120/208/240/277 N Y N

TWR1 100M 120/347 LPI CSA 100 120/347 N Y Y

TWR1 100M TB LPI 100 120/208/240/277 N Y N

TWR1 150M 120 PE LPI 150 120 Y Y Y

TWR1 150M 277 PE LPI 150 277 Y Y Y

TWR1 150M TB LPI 150 120/208/240/277 N Y N

TWR1 175M 120/347 LPI CSA 175 120/347 N Y Y

High pressure sodium

TWR1 70S 120/347 LPI CSA 70 120/347 N Y Y

TWR1 70S TB LPI 70 120/208/240/277 N Y N

TWR1 100S 120/347 LPI CSA 100 120/347 N Y Y

TWR1 100S TB LPI 100 120/208/240/277 N Y N

TWR1 150S 120/347 LPI CSA 150 120/347 N Y Y

TWR1 150S TB LPI 150 120/208/240/277 N Y N

Compact uorescent

TWR1 2/42TRT 120 PE LPI 2/42 120/208/240/277 Y Y Y

TWR1 2/42TRT MVOLT LPI 2/42 120/208/240/277 N Y Y

All dimensions shown in inches (centimeters) unless otherwise noted.

*Weight as congured in example below.

Accessories: Order as separate catalog number.

Shipped separately

TWR1WG U W

ireguard

Summary of content (2 pages)

PAGE 1
Catalog Number Notes FEATURES & SPECIFICATIONS INTENDED USE Type Ideal for mounting above entryways and loading docks. CONSTRUCTION Rugged, corrosion-resistant die-cast aluminum back housing and hinged door frame. Castings are sealed with a one-piece gasket to inhibit the entrance of external contaminants. Finish is bronze polyester powder paint for lasting durability. Wall Packs OPTICS TWR1 Refractor is prismatic borosilicate glass. Reflector is die-formed anodized stippled aluminum.
PAGE 2
TWR1 High Pressure Sodium/Metal Halide/Compact Fluorescent Wall Pack 1 1.5 1 0.5 0.25 2 3 4 2 3 4 5 6 5 -1 0 5 2.5 1 1.51 0.5 0.25 2 3 4 0 1 2 3 4 5 TEST NO: LTL10373 6 -2 -1 0 5 1 2.5 1.51 2 0.5 0.25 3 4 5 0 1 2 3 4 5 6 W lamp, horizontal lamp orientation Footcandle values based on 12' W lamp, horizontal lamp orientation Footcandle values based on 12' W lamp, horizontal lamp orientation Footcandle values based on 12' mounting height, 6300 rated lumens.