Installation Guide
Installation Instructions
TWP-LED
Part Number: RJ521354 REV C
Revision Date: 11-28-18
Lithonia Lighting Outdoor • One Lithonia Way • Conyers, Georgia 30012
Phone: 800-279-8041 • Fax: 770.918.1209 • www.lithonia.com
© 2011 Acuity Brands Lighting, Inc. All rights reserved. 11/12
FIXTURE MOUNT:
1. Drill xture per drilling detail
(Figure D). NOTE: Remove photo-
electric cell (when provided) before
drilling for xture mounted wire
guard.
2. Place wire guard over xture.
3. Secure in place with two (2) 10-
24 fasteners, washers, and spacers
(provided) as shown (Figure E).
Troubleshooting: If this xture fails to operate properly, check to make sure: • The xture is wired correctly. • The xture is grounded
correctly. • The line voltage at the xture is correct. If all these variables have been checked and the xture still does not operate as
specied, contact your local Lithonia Lighting distributor.
Figure E
1”from
wall
7 1/2”
Figure D