Specification

One Lithonia Way, Conyers, GA 30012 | 1-800-705-7378 | www.lithonia.com
© 2019-2020 Acuity Brands Lighting, Inc. All rights reserved. Rev. 11/24/20 Page 2 of 3
CONTRACTOR SELECT TFX SERIES LED
INTENDED USE:
The traditional and robust design of the TFX LED oodlight with energy efcient LEDs, is
suitable for replacing up to 1000W Metal Halide. It is ideal for landscape, signage, and accent
lighting in heavy commercial and residential applications.
CONSTRUCTION:
Die-cast aluminum housing has integral heat sink ns to optimize thermal management
through conductive and convective cooling. The LED driver is mounted in direct contact with
the casting to promote low operating temperature and long life. Housing is completely
sealed against moisture and environmental contaminants (IP66). Low EPA for optimized wind
loading.
ELECTRICAL:
Light engine(s) consist of LEDs directly coupled to the housing to maximize heat dissipation
and promote long life (up to L90 / 100,000 hrs.).
INSTALLATION:
The integral slip tter option (IS) mates with standard 2 3/8” tenons for pole-top mounting.
The yoke mount (YK) option allows mounting to solid surfaces and has a 30” SO cord. TFX
luminaires are suitable for aiming in any orientation. TFX is rated for installation on ground.
Can be tilted from 0° horizontal facing downwards, up to 180° horizontal facing upwards.
LISTINGS:
UL certied to U.S. and Canadian standards. Luminaire is IP66 rated. Rated for -40°C
minimum ambient.
DesignLights Consortium® (DLC) Premium qualied product and DLC qualied product.
Not all versions of this product may be DLC Premium qualied or DLC qualied. Please
check the DLC Qualied Products List at www.designlights.org/QPL to conrm which versions
are qualied.
WARRANTY:
5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/support/customer-support/terms-and-conditions
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specications subject to change without notice.
Specifications Dimensions
All dimensions are inches (centimeters) unless otherwise indicated.
TFX1
TFX1 with Knuckle Mount
TFX1 with Yoke Mount
9-3/8” [24cm]
10” [25.5cm]
7-1/4” [19cm]
3-1/2” [9cm]
3-1/4” [8.5cm]
9-3/8” [24cm]
10-1/4” [26cm]
7-1/4” [19cm]
3-3/4” [9.5cm]
3-1/4” [8.5cm]
Power wire length
30” [80cm]
TFX2
TFX2 with Integral Slip-Fitter
TFX2 with Yoke Mount
14-7/8” [38cm]
17-3/4” [45cm]
10-1/8” [26cm]
8-1/2” [21.5cm]
4-3/4” [12cm]
14-7/8” [38cm]
14-1/2” [37cm]
10-1/8” [26cm]
5-1/4” [13.5cm]
4-3/4” [12cm]
Power wire length
30” [80cm]
TFX4TFX3
TFX4 with Integral Slip-Fitter
TFX3 with Integral Slip-Fitter
TFX4 with Yoke Mount
TFX3 with Yoke Mount
18” [46cm]
20-3/4” [53cm]
13-1/8” [34cm]
8-1/2” [21.5cm]
5” [13cm]
18” [46cm]
17-3/4” [45cm]
13-1/8” [34cm]
5-1/2” [14cm]
5” [13cm]
Power wire length
30” [80cm]
22-1/4” [57cm]
23-1/2” [60cm]
16” [41cm]
8-1/2” [21.5cm]
6-1/8” [16cm]
22-1/4” [57cm]
21-5/8” [55cm]
16” [41cm]
6-1/2” [16.5cm]
6-1/8” [16cm]
Power wire length
30” [80cm]