Cut Sheet

OUTDOOR TFM-CF
Catalog
Number
Notes
Type
*Weight as congured in example below.
All dimensions are inches (centimeters) unless otherwise specied.
TFM RB
Series Wattage/lamp Distribution Voltage Ballast Mounting Options Finish
6
Lamp
8
TFM 13DTT
18DTT
26DTT
32TRT
42TRT
RB (6 X 6) 120
277
347
MVOLT
(blank) Electronic 0° Shipped installed
(blank) Knuckle
YK Yoke mounting
Shipped separately
2, 3
TFMTS Tenon sliptter
(2-3/8" OD
tenon)
Shipped installed in xture
BDP Ballast disconnect
GMF Internal slow-blow fusing
4
PE Photocell
C62 2' 16-3 SEO cord prewired
C42 2' 14-3 SEO cord prewired
C22 2' 12-3 SEO cord prewired
CSA CSA Certied
NOM NOM Certied
Shipped separately
2, 3, 5
WG Wire guard
VG Vandal guard
UV Upper visor
FV Full visor
DNA Natural aluminum
DBL Black
DSB Steel blue
DMB Medium bronze
DGC Charcoal gray
DTG Tennis green
DBR Bright red
DSS Sandstone
DWH White
CR Enhanced corrosion
resistance
CRT Non-stick protective
coating
7
LPI Lamp included
L/LP Less lamp
ORDERING INFORMATION
Example: TFM 32TRT RB MVOLT LPI
Floodlighting
TFM
COMPACT FLUORESCENT: 13-42W
Specications
Height (includes knuckle):
10-5/8 (26.9)
Width: 10-5/8 (26.9)
Depth: 6-7/8 (17.4)
*Weight: 6.86 lbs (3.1kg)
EPA: 0.5 ft
2
10-5/8
(26.9)
10-5/8
(26.9)
6-7/8
(17.4)
FEATURES & SPECIFICATIONS
INTENDED USE — Ideal for signs, ags, building facades and landscaping.
CONSTRUCTION — Compact NEMA heavy-duty construction. Die-cast aluminum housing and front
bezel. Bezel is removable via position-oriented hinge-cam design. Lens is thermal- and shock-resistant,
1/8" clear tempered glass.
Finish: Standard nish is dark bronze (DDB) corrosion-resistant polyester powder nish with other archi-
tectural colors available.
OPTICS — Anodized aluminum faceted parabolic construction provides high eciencies.
ELECTRICAL —
Ballast: Multi-volt (120-277) high power factor electronic ballast, <10% THD, with starting
temperature of 0
°F (-18°C). Electrical components are mounted to the cast aluminum housing, providing
easy access during servicing.
Socket: Four-pin, positive-latch thermoplastic socket.
INSTALLATION — Die-cast aluminum 1/2" NPSM mounting knuckle is standard. Steel painted mounting
yoke and 3 ft. 16 SEO cord is optional.
LISTINGS — UL Listed. CSA or NOM Certied (see Options). UL Listed for wet locations. IP65 rated.
Note: Specications subject to change without notice.
Lead times will vary depending on options selected. Consult with your sales representative.
Notes
1 Multi-volt electronic ballast capable of operating on any line voltage from 120-277V.
2 May be ordered as an accessory.
3 Must specify nish when ordered as an accessory.
4 Not available with MVOLT. Must specify voltage.
5 Prex with TFM when ordered as an accessory.
6 See www.lithonia.com/archcolors for additional color options.
7 Black nish only.
8 Must be specied. 35K lamp with LPI.