Specification

TDD LED
Series Light Engine Color Temperature Voltage Controls Finish Option
TDD LED P1 3,096 lumens 40K 4000K
1
120 120 volts PE Photocell DNA Grey M4
TDD LED
LED Area Luminaire
Ordering Information
EXAMPLE: TDD LED P1 40K 120 PE DNA M4
NOTES
1 Correlated color temperature (CCT) shown is nominal per
ANSI C78, 377-2008.
Catalog
Number
Notes
Type
One Lithonia Way • Conyers, Georgia 30012 • Phone: [phone] • Fax: [phone] • www.lithonia.com
© 2013-2017 Acuity Brands Lighting, Inc. All rights reserved.
Hit the Tab key or mouse over the page to see all interactive elements.
Introduction
The popular TDD LED luminaire is now available
with long-lasting, energy-efficient LED technology.
Featuring a classic dayform, the TDD LED offers
a fresh update to a traditional appearance and is
powered by advanced LEDs.
The TDD LED luminaire is powerful yet energy
efficient, capable of replacing up to a 100W metal
halide luminaire while saving up to 84% in energy
costs. Offering an expected service life of more
than 10 years, the TDD LED eliminates frequent
lamp and ballast replacements associated with
traditional technologies.
Width:
11”
(28 cm)
Height:
4.7”
(13.3 cm)
Depth:
13-1/2”
(34 cm)
Weight:
2.45 lbs
(1.11kg)
Specifications
H
W
D
Accessories
Ordered and shipped separately.
OMA Mounting Arm
Width:
2-3/4”
(7 cm)
Height:
2-1/4”
(5.6 cm)
Opening:
1-3/4”
(4.5 cm)
Backplate
W
H
O
FEATURES & SPECIFICATIONS
INTENDED USE
The energy savings, long life and easy-to-install design of the TDD LED make it the smart choice
for building-and post-mounted doorway, pathway and yard illumination for nearly any facility.
CONSTRUCTION
Die-cast aluminum housing with span aluminum shroud, has an impact-resistant, polycarbonate
lens which protects the LEDs. The fixture is sealed against moisture and environmental
contaminants.
FINISH
Exterior parts are protected by a thermoset powder-coat finish that provides superior resistance
to corrosion and weathering. A thightly controlled multi-stage process ensures a minimum 2 mils
thickness for a finish that can withstand extreme climate changes without cracking or peeling
OPTICS
Protective polycarbonate lens covers the light engine’s LEDs. Light engines are available in
4000K (80 min. CRI) configurations.
Electrical
Light engine consists of two multi-chip, high-output LEDs mounted on an integral aluminum
heat sink to maximize heat dissipation and promote long life (L98/50,000 hours at 40°C).
2.5kV surge protection. Electronic driver operates at 120V. Integrated photocell is standard.
No user serviceable parts.
Installation
Easily mounts to a wooden post or pole using 2” lag screws, included. Compatible with
OMA-1-5/8” mounting arm, sold seperately.
LISTINGS
UL Listed to U.S. and Canadian safety standards for wet locations. ENERGY STAR
®
certified
product.
WARRANTY
Five-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx.
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25°C.
Specifications subject to change without notice.
TDD LED
Rev. 03/22/17