Installation Instructions

Installation Instructions
RSX LED
©2016 Acuity Brands Lighting, Inc.
All Rights Reserved.
Lithonia Lighting Outdoor
One Lithonia Way, Conyers, GA 30012
Phone: [phone] Fax: [phone]
www.lithonia.com
Part Number: IM-459 Rev A
Revision Date: 8/29/19
RSX FAO SETTING INSTRUCTIONS
NOTE: If FAO does not need to be adjusted (default seng is maximum output), install luminaire as normal.
1. Loosen six capve screws and remove RSX door to access the luminaire electronics (Fig 23). Set aside for reinstallaon.
2. In all RSX family luminaires, the FAO module is in the approximate locaon shown in gure 24a. Use a at-head screwdriver
to turn the FAO dial (gure 24b). Note that posion 8 is the default seng and the maximum output value (no dimming).
For Contractor Select conguraons, refer table 1 on the next sheet for lumen output values.
Page #15