Technical Specifications

One Lithonia Way, Conyers, GA 30012 | 770-922-9000 | www.lithonia.com

CONTRACTOR SELECT OVWP LED

INTENDED USE:

The OVWP provides years of maintenance-free general inllumination for commercial or

residential outdoor applications such as driveways, patios, loading areas and warehouses.

CONSTRUCTION:

Rugged cast-aluminum, corrosion-resistant rear mounting plate. Impact resistant

polycarbonate front cover/diffuser resists fading and cracking. Driver operates at 120V.

Operating temperature -40°C to 40°C. Lenses are engineered for uniform light distribution,

uniformity and xture spacing. See Lighting Facts Labels for specic xture performance.

ELECTRICAL:

Light engine consists of long-life, high-efcacy LEDs mounted on an internal aluminum heat

sink to maximize heat dissipation and promote long life (L95/100,000 hours at 40°C). Driver

and integral photocell operate at 120V and are fully enclosed in the upper housing. There are

no user serviceable parts. LEDs maintain 70% of light output at 35,000 hours of service. (LED

lifespan based on IESNA LM-80-08 results and calculated per IESNA TM-21-11 methodology).

INSTALLATION

Designed for wall mount applications more than 4’ above the ground. Mounts to a recessed

junction box (by others).

LISTINGS:

ETL Listed to US and Canadian safety standards for wet locations.

WARRANTY:

1-year limited warranty. Complete warranty terms located at:

www.acuitybrands.com/support/customer-support/terms-and-conditions

Note: Actual performance may differ as a result of end-user environment and application.

All values are design or typical values, measured under laboratory conditions at 25 °C.

Specications subject to change without notice.

Specifications

Dimensions

Width: 2-3/8"(6cm)

Height: 8-7/8"(22.5cm)

Depth: 5-5/16"(13.5cm)

Weight: 1.5lbs(0.68kg)

All dimensions are inches (centimeters) unless otherwise indicated.

" [13.5cm]

" [22.5cm]

" [6.0cm]