Installation Guide

ManualsBrandsLithonia Lighting ManualsElectrical360° Mounted White Motion Sensor Fixture

CONTRACTOR SELECT MSX12

Catalog

Number

Notes

Type

PRODUCT OVERVIEW

The MSX12 xture mount occupancy sensor provides reliable and versatile solutions for commercial

and industrial lighting control applications. The sensor utilizes passive infrared (PIR) detection and

features interchangeable lenses, providing exibility for multiple mounting height and coverage

pattern requirements.

SENSOR OPERATION

The sensor detects changes in the infrared energy given o by occupants as they move within the eld-

of-view. When occupancy is detected, a self-contained relay switches the connected lighting load on.

No initial eld calibration or sensitivity adjustments are required. The MSX12 is designed to switch both

LED and uorescent lighting loads. Robust relay protection makes MSX12 units capable of enduring the

extreme inrush conditions often encountered with LED loads.

A standard occupancy time delay is also present to ensure lights turn o (once minimum on timer has also

elapsed) if no occupancy is detected. This timer is factory set at 15 minutes to promote energy savings,

but is adjustable between 30 seconds and 30 minutes. These adjustments may be done through the

unit’s push-button.

FEATURES

• Two interchangeable lenses included – high mount 360° and low mount 360°

• Integrated mounting bracket drops lens down 3" from chase nipple - no bracket accessory required

• 100% digital PIR detection - provides excellent RF immunity

• Operates single or multiple LED and uorescent bay lights, strips or wraps

• Up to 60’ detection range on the oor

• Mounting heights up to 45'

• Green LED indicator

• Default 15 minute occupancy time delay

• Mounts to standard ½" knockout on xture or J-box

• Operating temperature 14° to 160°F

Contractor Select

Motion Sensor

Physical Specications

Size (w/ Mounting Flange): 3.75" H x 2.50" W x 4.00" D (9.5 cm x 6.4 cm x 10.2 cm)

WEIGHT: 6 oz

MOUNTING: 1/2" knockout (7/8" hole) on xture

COLOR: White

SILICONE FREE

ROHS COMPLIANT

Electrical Specications

MAXIMUM LOAD: 800 W @ 120 VAC; 1200 W @ 277 VAC

MINIMUM LOAD: None

MOTOR LOAD: 1/4 HP

FREQUENCY: 50/60 Hz

Environmental Specications

OPERATING TEMP: 14° to 160° F (-10° to 71° C)

RELATIVE HUMIDITY: 20 to 75% non-condensing

(electronics coated for corrosion resistance)

ORDERING INFORMATION

Catalog number UPC Description

MSX12 820476851148 Fixture Mounted Motion Sensor

http://bit.ly/Z3qcWD

Summary of content (2 pages)

PAGE 1
Catalog Number Notes PRODUCT OVERVIEW The MSX12 fixture mount occupancy sensor provides reliable and versatile solutions for commercial and industrial lighting control applications. The sensor utilizes passive infrared (PIR) detection and features interchangeable lenses, providing flexibility for multiple mounting height and coverage pattern requirements. SENSOR OPERATION The sensor detects changes in the infrared energy given off by occupants as they move within the fieldof-view.
PAGE 2
Motion Sensor MSX12 INSTRUCTIONS LENS TYPES REMOVING THE LENS LOW BAY 1 O P F 2 HIGH BAY INSTALLING TO A FIXTURE USING BALLAST DISCONNECT 1 2 3 INSTALLING TO FIXTURE USING SUPPLIED BALLAST DISCONNECT 1 2 3 COVERAGE PATTERN 0m < 15' 4.6 LOW VIEW 0 ft LOW VIEW HIGH VIEW 0 ft 0 ft Load White Neutral Black Line < 45' 4.6 15 9.1 30 HIGH VIEW HIGH BAY 0m 0 ft 30 HIGH VIEW 0m 0m 15 9.