Installation Guide

INSTALLATION INSTRUCTIONS
SAVE THESE INSTRUCTIONS
and deliver to owner after installation
IMPORTANT: When relamping, only use LED light sources specifi ed in the sign. Using other LED light sources may result in
transformer damage or unsafe conditions. For battery backup models, battery in the unit may not be fully charged. After elec-
tricity is connected to unit, let the battery charge up for at least 24 hours. The normal operation of the unit should take effect.
WIRING DIAGRAMS:
NOTE: Properly insulate the unused lead with a wirenut or other approved means.
PAGE: 3 of 4
BAT.
LED BOARD
POWER
BOARD
WHITE COM
ORANGE 100-300VAC
GREEN GROUND
POWER
BOARD
WHITE COM
ORANGE 100-300VAC
LED BOARD
GREEN GROUND
BATTERY BACKUP AC ONLY
ASSEMBLY INSTRUCTIONS to ADD FACE PANEL(S) to INSTALLED HOUSING
STEP 1: Ensure the appropriate panel is available to be attached to the already installed housing. Please note two (2) pan-
els would be needed for a double-face sign.
STEP 2: Separate the panel cover from the housing by removing the screw and set them both aside. For a double-face
sign, slide the backplate out through the channel.