Specification

ManualsBrandsLithonia Lighting ManualsCeiling Lights4 in. Matte White GU10 Glass Recessed Shower Kit

Catalog

Number

Notes

Type

Recessed Downlighting

LK4L

4” Lens Recessed Kit

Non-IC

Remodel Construction

FEATURES & SPECIFICATIONS

INTENDED USE — Recessed kits include housing, trim, lamp and wire connectors in one package. Rated

Non-IC for use in remodel applications. Approved for all ceiling and wiring types.

CONSTRUCTION — Steel housing with four remodel clips for installation in existing plaster, sheet rock or

mechanical ceiling. Heavy-gauge galvanized steel raceway arm. Durable, powder coat paint prevents rust.

Easily converts to new construction application using accessories (sold separately).

Galvanized steel junction box with ve 7/8” knockouts with slots for pryout. Not suitable for pulling wires.

Hook & hang snap-on J-box doors for easy access.

Rated for 90° C. Ground wire provided.

OPTICS — Matte white lens trim utilizes an MR16 GU10 line voltage lamp projecting 30-degree beam

spread for smooth distribution.

ELECTRICAL — Includes (1) MR16 GU10 50W lamp, maximum wattage. Socket attaches to reector to

ensure proper and consistent lamp position. Thermal protection provided against improper lamp usage.

120 volt only.

Compatible with standard incandescent dimmers.

LISTINGS — CSA Certied to US and Canadian safety standards. Wet location listed.

WARRANTY —1-year limited warranty (excludes lamp). Complete warranty terms located at

www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

Actual performance may dier as a result of end-user environment and application.

Note: Specications subject to change without notice.

Series Finish Lamps Voltage

LK4L 4” recessed kit MW Matte white (blank) 50W (blank) 120V

Accessories: Order as separate catalog number.

LKA4P 4” new construction pan

LKABH Hanger bars for conversion to new construction

All dimensions are inches (centimeters) unless otherwise indicated.

ORDERING INFORMATION

For shortest lead times, congure products using bolded options.

Example: LK4LMW

4-1/8

(10.5)

7-3/4

(19.7)

(15.2)

4-7/8

(12.4)

Specications

Aperture: 4 (10.2)

Ceiling opening: 4-1/8 (10.5)

Overlap trim: 4-7/8 (12.4)

Height: 6 (15.2)

Length: 7-3/4 (19.7)

Max. ceiling thickness: 1 (2.54)

LKABH

Hanger bars

LKA4P

New construction pan

RECESSED DOWNLIGHTING LK4L

Summary of content (2 pages)

PAGE 1
Catalog Number Notes FEATURES & SPECIFICATIONS INTENDED USE — Recessed kits include housing, trim, lamp and wire connectors in one package. Rated Non-IC for use in remodel applications. Approved for all ceiling and wiring types. Type CONSTRUCTION — Steel housing with four remodel clips for installation in existing plaster, sheet rock or mechanical ceiling. Heavy-gauge galvanized steel raceway arm. Durable, powder coat paint prevents rust.
PAGE 2
4” Lens Recessed Downlighting Kit PHOTOMETRICS For MR16 GU10 reflector lamps, see lamp manufacturer’s published raw data for photometrics. INSTALLATION The following instructions are for remodel applications. New construction applications require new construction pan and hanger bars (see accessories). Step 1: Using provided stencil, trace cutout lines for housing hole on ceiling. Use saw to make appropriate 4-1/8” cutout.