Technical Specifications

DOWNLIGHTING LK3BP-LED_(GEN3)
Catalog
Number
Notes
Type
LED Recessed Downlighting
LK3
3” LED Recessed Kit
IC/Non-IC
New & Remodel Construction
FEATURES & SPECIFICATIONS
INTENDED USE — Recessed LED kits include housing, trim, and wire connectors in one package. The LED
kit is the most economical means to create a well lit environment with exceptional energy eciency and
near zero maintenance. The LED kit maintains at least 70% light output for 28,000 hours.
CONSTRUCTION — Steel housing with 3 remodel clips and 3 wire nuts for installation in existing plaster,
sheet rock or mechanical ceiling. Heavy-gauge galvanized steel raceway arm. Durable, powder coat paint
prevents rust. Easily converts to new construction application using accessories (sold separately).
Galvanized steel junction box with three 7/8” knockouts with slots for pryout. Not suitable for pulling wires.
Hook & hang snap-on J-box doors for easy access.
Rated for 90°C. Ground wire provided.
Utilizes 3000K color temperature LEDs.
OPTICS — White bae recesses optical system into the ceiling to prevent glare and provide a traditional
look. Diused lens provides even illumination throughout the space.
ELECTRICAL — High-eciency driver mounted on the module. Primary power disconnect provided for
simple connection to a dedicated LED connector in the housing.
Dimming down to 15%. See page 2 for recommended triac dimmers.
Standard input wattage is 8.3 W, 48 lumens per watt; equivalent to 45 watt PAR20.
LISTINGS — CSA certied for use in the US and Canadian safety standards. California T24 compliant. Wet
location listed.
WARRANTY — Five year limited warranty covering defects in materials and workmanship, including LED
and driver.
Note: Specications subject to change without notice.
LK3BPMW LED
Series Reector Finish Lamps/Lumens Color temperature Voltage
LK3 3
” LED recessed kit BP Bae MW Matte white LED 400 lumens (blank) 3000K (blank) 120V
LKABH
Hanger bars
LKA3P
New construction pan
Accessories: Order as separate catalog number.
LKA3P 3”
new construction pan
LKABH Hanger bars for conversion to new construction
All dimensions are inches (centimeters) unless otherwise indicated.
Specications
Aperture: 3 (7.6)
Ceiling opening: 3-1/8 (7.9)
Overlap trim: 4 (10.2)
Height: 6 (15.2)
Length: 7-1/8 (18.1)
Max. ceiling thickness: 5/8” gypsum; 3/4” drop ceiling
3”
(7.6)
7-1/8”
(18.1)
6”
(15.2)
4”
(10.2)
ORDERING INFORMATION
For shortest lead times, congure products using bolded options.
Example: LK3BPMW LED
D
I
M
M
A
B
L
E