Specifications

EMERGENCY EDGEDGR
Catalog
Number
Notes
Type
ORDERING INFORMATION
For shortest lead times, congure products using bolded options.
Example: EDG 1 R EL
Family Housing color Number of faces Letter color Operations Options
EDG Surface mount
LED edge-lit exit
EDGR Recessed LED
edge-lit exit
(blank) Brushed
aluminum
W White
1 Single face
2 Double face
R Red on clear
(single face only)
1
G Green on clear
(single face only)
1
RMR Red on mirror
2
GMR Green on mirror
2
RW Red on white
3
GW Green on white
3
(blank) AC only
EL
Nickel-cadmium battery
X2
Provides primary and secondary AC input
4
SD
Self-diagnostics
5
(blank) None
WM
Recessed wall mount
6
Accessories: Order as separate item.
ELA US12 12” stem kit with brushed aluminum canopy
7
ELA W US12 12” stem kit with white canopy
7
FEATURES & SPECIFICATIONS
INTENDED USE — Suitable for applications requiring attractive edge-lit exit signage, universal installa-
tion and low energy consumption.
CONSTRUCTION — Extruded brushed aluminum nish.
Clear acrylic panels- letters measure 6” high with 3/4” stroke, with 100 ft viewing distance rating, based
upon UL 924 standard.
For single-face clear panels, EXIT is seen as a reversed image from the back.
OPTICS — LEDs mounted on printed circuit board. The typical life of the exit LED lamp is 10 years.
The LED operating frequency is 120Hz.
ELECTRICAL — Dual voltage input capacity (120/277V).
Battery: (EL Option) – Sealed, maintenance free nickel-cadmium battery delivers 90 minutes capacity to
emergency lamps. Test switch provides manual activation of 30-second diagnostic testing for on-demand
visual inspection.
Self-diagnostic testing (EL Option Only) for 30 seconds every 30 days and 90 minutes annually. Diagnostic
evaluation of LED light source, AC to DC transfer, charging and battery condition.
X2 Option: This circuit option on the AC-only exit enables it to be connected to two dierent (one acting
as a backup to the other) supplies at the same time.
INSTALLATION — EDG – Universal surface (top, end or back) mounting. Canopy provided.
EDGR – Recessed mounting. Bar hanger and brackets provided for both new or restricted ceiling access
installation applications. Back wall mount (WM) option.
Universal directional indicators. Field selected and attached.
LISTINGS — UL damp location listed 32°-122°F (0°-50°C) standard. Meets UL924, NFPA 101 (current Life
Safety Code), NEC and OSHA illumination standards.
WARRANTY — 3-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
NOTE: Actual performance may dier as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25°C.
Specications subject to change without notice.
LED Edge-Lit Exits
EDG
EDGR
LED Lamps
Notes
1 For single-face clear panels, EXIT is seen as a reversed image from the back.
2 Available with single and double face.
3 White panel standard for double and single face.
4 Not available with EL and SD options.
5 Available with EL option only.
6 Available on EDGR single face only
7 See spec sheet ELA-StemKits. Only available for EDG.
All dimensions are inches (centimeters)
unless otherwise noted.
EDG (surface mount)
EDGR (recessed mount)
Specications
EDG (End Mount) EDG (Top Mount)
Length: 13-5/8 (34.6) Length: 13 (33.0)
Depth: 5-1/2(14.0) Depth: 4-5/16 (11.0)
Height: 11-1/8 (28.3) Height: 11-3/4 (29.8)
Shipping Weight : 4 lbs (1.8 kgs) Shipping Weight : 4 lbs (1.8 kgs)
EDG (Back Mount) EDGR
Length: 13 (33.0) Length: 13 (33.0)
Depth: 3 (7.6) Depth: 1-3/4 (4.4)
Height: 11-1/8 (28.3) Height: 8 (20.3)
Shipping Weight : 4 lbs (1.8 kgs) Shipping Weight : 6.8 lbs (3.1 kgs)
Shipping Weight (WM option) :
8.1 lbs (3.7 kgs)