Specification

LDN6
6” OPEN and WALLWASH LED
Non-IC
New Construction Downlight
FEATURES & SPECIFICATIONS
INTENDED USE — Typical applications include corridors, lobbies, conference rooms and private oces.
CONSTRUCTION — 16-gauge galvanized steel mounting/plaster frame with trim clips to mount open
conical shape reector.
Vertically adjustable mounting brackets that use 16-gauge at bar hangers (included), 1/2” conduit or
C channel T-bar fasteners. Provides 3-3/4” total adjustment.
Post installation adjustment possible from above or below the ceiling.
Galvanized steel junction box with bottom-hinged access covers and spring latches. Two combination
1/2”-3/4” and three 1/2” knockouts for straight-through conduit runs. Capacity: 8 (4 in, 4 out) No. 12
AWG conductors, rated for 90°C.
Secondary housing adjustment system for precise, nal ceiling-to-ange alignment.
Maximum 1-1/2” ceiling thickness.
OPTICS — LED light source with diused lens, recessed in a deep reec tor with a 55-degree cuto. Alumi-
num full reec tors are optically designed to maximize lumen output and to provide superior glare control.
Anodized trim colors for open and wallwash reectors are available in clear, pewter, wheat or gold. White
polyester powder coat also available.
Minimum CRI of 80.
ELECTRICAL — High-eciency, eldoLED 0-10V dimming driver mounted to the junction box, dims
luminaire to 10% of its light output. 1% dimming option available (see EZ1 ordering options below).
Dimming xture requires two (2) additional low-voltage wires to be pulled.
For compatible dimmers and dimming range, refer to Dimmer Compatibility Chart on page 4.
The system maintains 70% lumen output for more than 50,000 hours.
LISTINGS — CSA certied to US and Canadian safety standards. Open downlight (LO6): Wet location
listed. Wallwash downlight (LW6): Rated for damp and dry locations only. ENERGY STAR® certied.
WARRANTY — 5-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Specications subject to change without notice.
ORDERING INFORMATION
Example: LDN6 35/15 LO6AR 120
DOWNLIGHTING LDN6
Lead times will vary depending on options selected. Consult with your sales representative.
LDN6
Series Color temperature Lumens
1,2
Reector Trim color Finish Voltage Options
LDN6 27/ 2700 K
30/ 3000 K
35/ 3500 K
40/ 4000 K
06 600
lumens
10 1000
lumens
15 1500
lumens
20 2000
lumens
LO6 Open
downlight
LW6 Wallwash
downlight
3
AR Clear
PR Pewter
WTR Wheat
GR Gold
WR White
4
(blank) Semi-
specular
LD Matte-
diuse
LS Specular
120
277
347
5
EL Emergency battery pack with integral test switch
6
ELR Emergency battery pack with remote test switch
6
SF Single fuse
TRW White painted ange
7
TRBL Black painted ange
NPS80EZ nLight® dimming pack controls 0-10V eldoLED drivers.
Refer to TN-633.
NPS80EZER nLight® dimming pack controls 0-10V eldoLED drivers. ER
controls xtures on emergency circuit. Refer to TN-633.
8
RRL__ RELOC®-ready luminaire connectors enables a simple and
consistent factory installed option across all ABL luminaire
brands. Refer to RRL for complete nomenclature.
EZ1 eldoLED dims to 1%
CP Chicago plenum
5, 9
LDN6 35/15 LO6AR 120
Maximum Overall Dimensions – All dimensions are inches (centimeters) unless otherwise indicated.
Lumen package (A) Height (B) Frame height (C) Aperture (D) Ceiling opening (E) Outside diameter (F) Width (G) Length
600 lm
6-7/16 (16.4)
5-3/4
(14.6)
6-15/16
(17.6)
7-1/8
(18.1)
7-1/2
(19.1)
12-15/16
(32.8)
10-15/16
(27.8)
1000 lm
1500 lm
2000 lm 7-13/16 (19.9)
Overall height varies by lumen package. Reference dimension chart for details.
D
I
M
M
A
B
L
E
G
F
A
B
C
D
E
Accessories: Order as separate catalog number.
EAC ISSM 375 Compact interruptible emergency AC power system
EAC ISSM 125 Compact interruptible emergency AC power system
GRA68 JZ Oversized trim ring with 8” outside diameter
10
SCA6 Sloped ceiling adapter. Refer to TECH-SCA for more options.
Notes
1 Approximate lumen output.
2 Overall height varies by lumen package. Reference dimension chart on page 1.
3 Rated for damp and dry locations only.
4 Not available with nishes.
5 Not available with emergency options.
6 For dimensional changes, refer to chart on page 4. Not available with CP option.
7 Not available with WR (white trim color).
8 For use with generator supply EM power. Will require an emergency hot feed and normal hot feed.
9 277 volt CP products require marked spacing. Install with minimal spacing between: (a) Center-to-center of adjacent lumi-
naires: 2 ft.; (b) Top of luminaire to overhead building member: 3 in.; (c) Luminaire center to side of building member: 1 ft.
10 Refer to TECH-GOOF RINGS for more options.
Catalog
Number
Notes
Type