Specification

One Lithonia Way, Conyers, GA 30012 | 800-705-7378 (SERV) | www.lithonia.com
© 2019-2022 Acuity Brands Lighting, Inc. All rights reserved. Rev. 02/08/22 Page 2 of 2
DECORATIVE RESIDENTIAL: CONTRACTOR SELECT LB LED CURVED BASKET WRAPAROUND
INTENDED USE:
LB LED wraparound provides a digital lighting platform to deliver general ambient lighting for
surface-mount applications. The SBL provides a similar look to that of an existing uorescent
wrap with all of the excellent benets of LED: energy savings, long life, and maintenance
savings. Ideal for closets, storage rooms, and ofces. Certain airborne contaminants can
diminish integrity of acrylic. Click here for Acrylic Environmental Compatibility
table for suitable uses.
CONSTRUCTION:
Linear side prisms control brightness, pyramidal bottom prisms minimize lamp image. Continuous
side flanges on fixture body provide light trap and continuous diffuser support to prevent accidental
opening and simplify maintenance. Full depth, white enamel end plates.
Die-formed from pre-painted code gauge cold-rolled steel. Channel cover snaps into place
without the use of tools.
OPTICS:
The curved prismatic diffuser reduces glare and pixilation without impacting performance.
ELECTRICAL:
Long-life LEDs, coupled with high-efficiency drivers, provide extended service life. 90% LED lumen
maintenance at 50,000 hours (L90/50,000).
INSTALLATION:
Suitable for suspension by cable, surface-mounting bracket, hook monopoint or single
(pendant) monopoint. Surface mounting not recommended without optional surface
mounting bracket. To maintain ambient listing, xture should be mounted at a minimum
plenum height of 18".
LISTINGS:
CSA certified to U.S. and Canadian standards. Damp listed.
DesignLights Consortium® (DLC) Premium qualied product. Not all versions of this product
may be DLC Premium qualied. Please check the DLC Qualied Products List at www.
designlights.org/QPL to conrm which versions are qualied.
WARRANTY:
5-year limited warranty. This is the only warranty provided and no other statements in this
specication sheet create any warranty of any kind. All other express and implied warranties
are disclaimed. Complete warranty terms located at: www.acuitybrands.com/support/
customer-support/terms-and-conditions
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specications subject to change without notice.
Specifications Dimensions
Length: 48 (122.0)
Width: 10 (25.4)
Depth: 2-3/4 (7.0)
All dimensions are inches (centimeters)
unless otherwise indicated.
MOUNTING DATA
Aircraft Cable
STACG – the standard aircraft cable kit in which only the hanging wire will be included.
STACGF – will include a power feed cable with 3 conductors (HOT, NEUTRAL, GROUND)
STACGFD – same as above with Dimming leads (HOT, NEUTRAL, GROUND, VIOLET, GREY)
STACGE – will include a power feed cable with 4 conductors (HOT1, HOT2, NEUTRAL, GROUND)
for xtures with a battery pack.
Ceiling Type
F1 – for use with most T-bar and screw slot grid ceiling applications. Designed for on-grid and
off-grid installations.
F2 – for use with recessed or surface-mount horizontal J-box applications.
How to order:
1. For aircraft cable, choose one STACG, STACGF, STACGFD, or STACGE
(required for each suspension point)
2. Choose length 36”, 72” or 144”
3. For ceiling type choose F1 or F2
Ex. STACG36 F1, STACGF72 F2
Stem Suspension
Individual installation — Two single-stem hangers required
Note: 2' congurations with emergency option cannot be stem mounted.
10
(25.4)
2-3/
4
(7.0)