Specification

Catalog
Number
Notes
Type
FLUORESCENT LB-N
Series Number of lamps Lamp type Voltage Options
LB 2 lamps, 10" wide
For tandem double-length unit,
add prex T. Example: TLB
2
Not included
17 17W T8 (24")
32 32W T8 (48")
14T5 14W T5 (22-1/2")
28T5 28W T5 (46-1/2")
54T5HO 54W T5 HO (46-1/2")
120
277
347
MVOLT
1
Others available
GEB10IS Electronic ballast, <10% THD, instant start
GEB10PS Electronic ballast, <10% THD, programmed start
GEB95 .95 ballast factor
2
GEB955 .95 ballast factor, step dimming
2
EL Emergency battery pack (nominal 300 lumens, see Life Safety Section)
3
EL14 Emergency battery pack (nominal 1400 lumens, see Life Safety Section)
3
GLR Internal fast-blow fuse
4
GMF Internal slow-blow fuse
4
CSA Listed and labeled to comply with Canadian Standards
SSR Specular silver interior nish (95% reective)
NOM NOM certied
Accessories: Order as separate catalog number.
SQ Swivel-stem hanger (specify in 2" increments)
1B Ceiling spacer (adjusts from 1-1/2" to 2-1/2" from ceiling)
ORDERING INFORMATION
For shortest lead times, congure products using standard options (shown in bold.)
Example: LB 2 32 MVOLT GEB10IS
Specifications
T8 length: 24 (61.0)
48 (122.0)
96 (243.9)
T5 length: 22-1/2 (57.2)
46-1/2 (118.1)
92-1/2 (235.0)
Width: 10 (25.4)
Depth: 2-3/4 (7.0)
All dimensions are inches (centimeters) unless specied otherwise.
FEATURES & SPECIFICATIONS
INTENDED USE  For applications that require the clean appearance of a low prole, brightness
controlled wraparound. Provides broad distribution of light for oces, schools and corridors. Certain
airborne contaminants can diminish integrity of acrylic. Click here for Acrylic Environmental
Compatibility table for suitable uses.
CONSTRUCTION  Metal parts are die formed from code-gauge steel. Prismatic diuser is 100% acrylic
with sonically welded luminous ends. Continuous side anges on xture body provide light trap and
continuous diuser support to prevent accidental opening and simplify maintenance.
Finish: Five stage iron-phosphate pretreatment assure superior paint adhesion and rust resistance.
Painted parts nished with high-gloss, high-reectivity baked white polyester enamel (low VOC).
OPTICS  Curved prismatic diuser with linear side prisms minimize lamp image and provides high
angle brightness control. Luminous end plates soften appearance for improved aesthetics.
ELECTRICAL  Thermally-protected, resetting, Class P, HPF, non-PCB, UL Listed, CSA certied ballast
is standard. Luminaire is suitable for damp locations. AWM, TFN or THHN wire used throughout, rated
for required temperatures.
UL/CSA Listed ballast disconnect w/strain relief and leads provided standard.
LISTINGS  UL Listed to US and Canadian safety standards. Optional: Canada CSA or Mexico NOM
WARRANTY — 1-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Specications subject to change without notice.
Low-Prole Wraparound
LB
T8/T5
NARROW BODY
2', 4' or 8' length
2 lamps
10
(25.4)
2-3/
4
(7.0)
1-1/2
(3.8)
3-3/4
(9.5)
10
(25.4)
3-9/16
(9.0)
2-3/
4
(7.0
)
1-3/8
(3.5)
T8
T5
Notes
1 Electronic ballast 120V through 277V only.
2 Only available with 14T5 or 28T5.
3 Not available with T5 2' conguration.
4 Must specify voltage.